| Net Power | 45hp |
| Engine Model | C1.7 Turbo |
| Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 45hp |
| Gross Power - 2,400 rpm - SAE J1995:2014 | 48.4hp |
| Bore | 3.3in |
| Stroke | 3.9in |
| Displacement | 101in³ |
| Emissions | The Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Note | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load. |
| Operating Weight | 12688lb |
| Minimum Operating Weight with Canopy* | 11016lb |
| Maximum Operating Weight with Canopy** | 12469lb |
| Minimum Operating Weight with Cab* | 11234lb |
| Maximum Operating Weight with Cab** | 12688lb |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight. |
| Note (2) | **Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket. |
| Dig Depth | 144.5in |
| Vertical Wall | 100.8in |
| Maximum Reach - Ground Level | 229.7in |
| Maximum Reach | 235.8in |
| Maximum Dig Height | 210.8in |
| Maximum Dump Clearance | 151.4in |
| Boom In Reach | 101.6in |
| Tail Swing without Counterweight | 43.1in |
| Tail Swing with Counterweight | 47.2in |
| Maximum Blade Height | 15.2in |
| Maximum Blade Depth | 23.4in |
| Boom Height - Shipping Position | 74.6in |
| O/A Shipping Height | 100.4in |
| Swing Bearing - Height | 24.4in |
| O/A Undercarriage Length | 101.6in |
| Overall Shipping Length* | 210.2in |
| Boom Swing - Right | 34.1° |
| Boom Swing - Left | 615mm |
| Track Belt/Shoe Width | 15.7in |
| Track Width | 78in |
| Ground Clearance | 13.2in |
| Stick Length | 63in |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Dig Depth | 134.6in |
| Vertical Wall | 91.9in |
| Maximum Reach - Ground Level | 220.1in |
| Maximum Reach | 226.6in |
| Maximum Dig Height | 205.3in |
| Maximum Dump Clearance | 145.7in |
| Boom In Reach | 101.2in |
| Tail Swing without Counterweight | 43.1in |
| Tail Swing with Counterweight | 47.2in |
| Maximum Blade Height | 15.2in |
| Maximum Blade Depth | 23.4in |
| Boom Height - Shipping Position | 71.7in |
| O/A Shipping Height | 100.4in |
| Swing Bearing - Height | 24.4in |
| O/A Undercarriage Length | 101.6in |
| Overall Shipping Length* | 208.9in |
| Boom Swing - Right | 34.1° |
| Boom Swing - Left | 24.2° |
| Track Belt/Shoe Width | 15.7in |
| Ground Clearance | 13.2in |
| Stick Length | 53.2in |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Machine Swing Speed | 9r/min |
| Boom Swing - Left | 72 Degrees |
| Boom Swing - Right | 50 Degrees |
| Counterweight | 534lb |
| Long Stick | 75lb |
| Steel Tracks with Pads | 827lb |
| Angle Blade | 225lb |
| Pump Flow at 2,400 rpm | 35gpm |
| Operating Pressure - Equipment | 3843psi |
| Operating Pressure - Travel | 3843psi |
| Operating Pressure - Swing | 2901psi |
| Auxiliary Circuit - Primary - Flow | 21gpm |
| Auxiliary Circuit - Primary - Pressure | 3843psi |
| Auxiliary Circuit - Secondary - Flow | 7gpm |
| Auxiliary Circuit - Secondary - Pressure | 3843psi |
| Digging Force - Stick - Standard | 6362lbf |
| Digging Force - Stick - Long | 5665lbf |
| Digging Force - Bucket | 11061lbf |
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Straight Blade Width | 78in |
| Straight Blade Height | 15.4in |
| Angle Blade Width | 78in |
| Angle Blade Height | 15.7in |
| Angle Blade - Left | 25 degrees |
| Angle Blade - Right | 25 degrees |
| Travel Speed - High | 3.1mile/h |
| Travel Speed - Low | 1.7mile/h |
| Maximum Traction Force - High Speed | 5553lbf |
| Maximum Traction Force - Low Speed | 11353lbf |
| Ground Pressure - Minimum Weight | 4psi |
| Ground Pressure - Maximum Weight | 4.7psi |
| Gradeability - Maximum | 30 degrees |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1 |
| Operator Sound Pressure (ISO 6396:2008) | 76dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 97dB(A) |
| Note | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure a |
| Cooling System | 2.9gal (US) |
| Engine Oil | 1.6gal (US) |
| Fuel Tank | 17gal (US) |
| Hydraulic Tank | 16gal (US) |
| Hydraulic System | 20gal (US) |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Top Guard | ISO 10262:1998 Level I |
| Recyclability | 96% |
| Engine |
|
| Hydraulics |
|
| Guarding |
|
| Other |
|
| Operator Environment |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Other |
|
| Operator Environment |
|
| Guarding |
|
PDF
Print
Email
your location
call us
contact us