+
Net Power | 45HP |
Engine Model | C1.7 Turbo |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 45HP |
Note | Advertised power is tested per the specified standard in effect at the time of manufacture. |
Gross Power - 2,400 rpm - SAE J1995:2014 | 48.4HP |
Stroke | 3.9in |
Bore | 3.3in |
Displacement | 101in³ |
Emissions | The Cat® C3.3B engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
Operating Weight | 12688lb |
Minimum Operating Weight with Canopy* | 11016lb |
Note (1) | *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight. |
Minimum Operating Weight with Cab* | 11234lb |
Maximum Operating Weight with Cab** | 12688lb |
Maximum Operating Weight with Canopy** | 12469lb |
Note (2) | **Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket. |
Dig Depth | 144.5in |
Stick Length | 63in |
Track Width | 78in |
Maximum Blade Depth | 23.4in |
Maximum Dump Clearance | 151.4in |
Boom Swing - Left | 615mm |
Boom Swing - Right | 34.1° |
Swing Bearing - Height | 24.4in |
Boom Height - Shipping Position | 74.6in |
Boom In Reach | 101.6in |
Maximum Reach | 235.8in |
Track Belt/Shoe Width | 15.7in |
Maximum Reach - Ground Level | 229.7in |
Maximum Blade Height | 15.2in |
O/A Shipping Height | 100.4in |
Tail Swing without Counterweight | 43.1in |
O/A Undercarriage Length | 101.6in |
Tail Swing with Counterweight | 47.2in |
Vertical Wall | 100.8in |
Note | *Overall Shipping Length depends on blade position during shipment. |
Overall Shipping Length* | 210.2in |
Maximum Dig Height | 210.8in |
Ground Clearance | 13.2in |
Boom Swing - Left | 72 Degrees |
Machine Swing Speed | 9r/min |
Boom Swing - Right | 50 Degrees |
Maximum Dig Height | 205.3in |
Maximum Blade Height | 15.2in |
Dig Depth | 134.6in |
Boom Swing - Right | 34.1° |
Maximum Reach - Ground Level | 220.1in |
Tail Swing without Counterweight | 43.1in |
Boom Height - Shipping Position | 71.7in |
Maximum Blade Depth | 23.4in |
Maximum Reach | 226.6in |
Boom Swing - Left | 24.2° |
Overall Shipping Length* | 208.9in |
O/A Undercarriage Length | 101.6in |
Swing Bearing - Height | 24.4in |
Stick Length | 53.2in |
Track Belt/Shoe Width | 15.7in |
Boom In Reach | 101.2in |
Vertical Wall | 91.9in |
Tail Swing with Counterweight | 47.2in |
Maximum Dump Clearance | 145.7in |
O/A Shipping Height | 100.4in |
Note | *Overall Shipping Length depends on blade position during shipment. |
Ground Clearance | 13.2in |
Hydraulic Tank | 16gal (US) |
Fuel Tank | 17gal (US) |
Engine Oil | 1.6gal (US) |
Hydraulic System | 20gal (US) |
Cooling System | 2.9gal (US) |
Ground Pressure - Minimum Weight | 4psi |
Maximum Traction Force - Low Speed | 11353lbf |
Ground Pressure - Maximum Weight | 4.7psi |
Travel Speed - Low | 1.7mile/h |
Maximum Traction Force - High Speed | 5553lbf |
Travel Speed - High | 3.1mile/h |
Gradeability - Maximum | 30 degrees |
Angle Blade Width | 78in |
Straight Blade Height | 15.4in |
Straight Blade Width | 78in |
Angle Blade Height | 15.7in |
Angle Blade - Left | 25 degrees |
Angle Blade - Right | 25 degrees |
Average Exterior Sound Pressure (ISO 6395:2008) | 99dB(A) |
Note | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure a |
Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
Auxiliary Circuit - Secondary - Pressure | 3843psi |
Pump Flow at 2,400 rpm | 35gal/min |
Operating Pressure - Swing | 2901psi |
Operating Pressure - Travel | 3843psi |
Auxiliary Circuit - Secondary - Flow | 7gal/min |
Digging Force - Stick - Standard | 6362lbf |
Auxiliary Circuit - Primary - Pressure | 3843psi |
Auxiliary Circuit - Primary - Flow | 21gal/min |
Digging Force - Bucket | 11061lbf |
Operating Pressure - Equipment | 3843psi |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
Digging Force - Stick - Long | 5665lbf |
Top Guard | ISO 10262:1998 Level I |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
Counterweight | 534lb |
Long Stick | 75lb |
Steel Tracks with Pads | 827lb |
Angle Blade | 225lb |
Recyclability | 96% |
Engine |
|
Hydraulics |
|
Operator Environment |
|
Undercarriage |
|
Boom, Stick And Linkages |
|
Electrical |
|
Undercarriage |
|
Boom, Stick And Linkages |
|
Electrical |
|
Guarding |
|
Other |
|
Operator Environment |
|