+
Your nearest location
EAST KNOXVILLE
865-546-1414
contact us
Home New Gas Compression Engines G3412 Gas Compression Engine

G3412 Gas Compression Engine

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3412 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3412 engines include gas lift, gas gathering, and wellhead gas compression. Cat G3412 gas engine. Ratings: 448 bkW (600 bhp) @ 1800 rpm are available for non-regulated areas.

Engine Specifications

Maximum Rating 600BHP
Emissions Non-regulated areas
Displacement 1649in³
Minimum Rating 600BHP
Compression Ratio 9.7:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 4720lb
Oil Change Interval 750 hours
Ignition, Protection Altronic III
Stroke 6in
Bore 5.4in

Capacity for Liquids

Cooling System 20gal (US)
Lube Oil System - Refill 45gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Governor — Woodward PSG mechanica
    • Governor control — positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Digital ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Auxiliary oil reservoir
    • Rear sump oil pan
    • Oil filler in valve cover and dipstick — RH
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Air cleaner
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Control System
    • EG3P/2301A speed control governor
    • PSG electric governor
    • PSG pneumatic governor
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • ATAAC conversion
    • Aftercooler
    • Expansion tank
    • Heat exchanger
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
  • Fuel System
    • Dual gas regulator
    • Low energy fuel carburetor
    • Low pressure gas conversion
    • Propane and natural gas valve and jet kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply — digital ignition system
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Lube System
    • Auxiliary oil reservoir removal
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch
    • Clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motors — single 24-volt
    • Starting aids
    • Battery sets (24-volt dry), cables, and rack
  • General
    • Tool set
    • Digital diagnostic tool