+

G3408C Low Emissions Gas Compression Engine

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.

Engine Specifications

Maximum Rating 425BHP
Emissions NSPS Site Compliant Capable or Non-regulated
Displacement 1099in³
Minimum Rating 425BHP
Compression Ratio 8.5:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Weight - Dry 4950lb
Oil Change Interval 750 hours
Ignition, Protection Cat EIS
Stroke 6in
Bore 5.4in

Capacity for Liquids

Cooling System 14.5gal (US)
Lube Oil System - Refill 39gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Electronic governor
    • Air/fuel ratio control
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 0 flywheel
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator (1.5 to 5 psi gas supply required)
    • Natural gas carburetor
  • Ignition System
    • Cat Electronic Ignition System (EIS) with detonation sensitive timing
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — deep sump
    • Oil filler — RH in valve cover and RH dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Detonation sensitive timing control
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulleys
    • Lifting eyes
    • Cylinder block inspection covers

Optional Equipment

  • Air Inlet System
    • Air cleaner — two-stage
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
    • Exhaust manifold — instrument holes at each port
  • Fuel System
    • Dual gas regulator
    • Carburetor kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor
    • Air pressure regulator
    • Air silencer
    • Electric start control
    • Electric starting motors — single 24V
    • Starting aids
    • Battery sets — (24V dry), cables, and rack
  • General
    • Special paint