Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.
| Voltage/Frequency | 4000V ± 10%/60 Hz |
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) |
| Mounting Designation | F1 or F2 |
| Electric Motor Type | Squirrel Cage Induction Motor |
| Full Load Speed | 1189r/min |
| Shaft | 5.1in |
| Standards | NEMA MG1 |
| Connection of Stator Winding | Star |
| Locked Rotor Torque | 60% |
| No Load Current | 67 Amps |
| Locked Rotor Amps | 500% Code E |
| Service Factor | 1.15 SF (1.0 VFD) |
| Enclosure Type/Method of Cooling | WP-II |
| Duty | Continuous |
| Temperature Rise | Class B at rated load |
| Maximum Ambient Temperature | 104°F |
| Maximum Altitude - Before Derate | 3000ft |
| Rated Torque | 6625lb/ft |
| Full Load Current | 202 Amps |
| Insulation | Class F |
| Number of Poles | 6poles |
| Bearings |
|
| Rotors |
|
| Stators |
|
Print
Email
your location
call us
contact us