Cat 3508C engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield while maintaining low emissions.The ideal application for the 3508C engine is mechanical drive for land drilling rigs.3508C engines, with ratings: 671 bkW (900 bhp) @ 1200 rpm meet U.S. EPA Non-road Tier 2 equivalent and CARB Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
| Maximum Rating | 900BHP |
| Emissions | U.S. EPA Non-road Tier 2 |
| Displacement | 2111in³ |
| Minimum Rating | 900BHP |
| Bore | 6.69in |
| Stroke | 7.48in |
| Rated Speed | 1200r/min |
| Aspiration | Turbocharged-Aftercooled |
| Governor and Protection | ADEM A3 |
| Engine Weight - Net Dry | 10101lb |
| Rotation from Flywheel End | Counterclockwise |
| Oil Change Interval | 500 |
| Flywheel and Flywheel Housing | SAE No. 00 |
| Flywheel Teeth | 183 |
| Minimum Cooling System - Engine Only | 27.2gal (US) |
| Length | 84.1in |
| Width | 67in |
| Height | 79.7in |
| Air Inlet System |
|
| Control System |
|
| Cooling System |
|
| Exhaust System |
|
| Flywheels And Flywheel Housing |
|
| Fuel System |
|
| Instrumentation |
|
| Lube System |
|
| Mounting System |
|
| Power Take-offs |
|
| Protection System |
|
| General |
|
| Air Inlet System |
|
| Charging System |
|
| Control System |
|
| Cooling System |
|
| Exhaust System |
|
| Fuel Systems |
|
| Instrumentation |
|
| Lube System |
|
| Mounting System |
|
| Power Take-offs |
|
| Protection System |
|
| Starting System |
|
Print
Email
your location
call us
contact us