Cat C32 Generator Set (IMO III)

Generator Set Specifications

Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz

Engine Specifications

Configuration Vee-12, 4-stroke-Cycle-Diesel
Aspiration Turbocharged-aftercooled aspiration
Bore 5.71in
Stroke 6.38in
Displacement 1959in³
Emissions IMO III emissions certified (SCR required)
Rated Engine Speed 1500 rpm
Governor Electronic (A5 ECM)
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Oil Change Interval 750 hrs
Cooling Heat exchanger, keel or radiator cooled
Generator SR5 - Form Wound

Generator Set Dimensions

Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Standard Equipment

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Primary fuel filter with water separator installed on base frame
    • Duplex fuel filters with hybrid fuel lines
  • Generators And Generator Attachments
    • IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
  • Lube System
    • Oil fill, simplex filter and dipstick
  • Mounting System
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment

  • Alarm And Protection
    • MGCPIIIB control panel with Cat® Alarm and Protection System
    • IP44 generator protection
  • Exhaust System
    • Muffler
    • Water-in-fuel and exhaust temperature sensors
    • SOLAS approved spray shielding
  • Charging System
    • Charging alternator
  • Fuel System
    • Manual or electric fuel priming pump
    • Fuel cooler
  • Lube System
    • Duplex oil filters
  • Starting System
    • Starting motors – air, electric or redundant