| Gross Power - SAE J1995:2014 | 100hp |
| Net Power - SAE 1349 | 100hp |
| Displacement | 221in³ |
| Stroke | 4.7in |
| Bore | 3.9in |
| Engine Model | Cat C3.6TA (turbocharged, aftercooled) |
| Note | Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternato |
| Net Power - ISO 9249 | 99hp |
| Peak Torque - 1,600 rpm - SAE J1995 | 333lb/ft |
| Rated Operating Capacity | 3557lb |
| Tipping Load | 7114lb |
| Breakout Force - Tilt Cylinder | 8267lb |
| Breakout Force - Lift Cylinder | 6349lb |
| Rated Operating Capacity with Optional Counterweight | 3914lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Operating Weight | 10441lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Wheel Base | 54.6in |
| Height - Top of Cab | 86.2in |
| Vehicle Width over Tires | 72in |
| Ground Clearance | 8in |
| Departure Angle | 23.6° |
| Maximum Dump Angle | 43.5° |
| Maximum Overall Height | 164.3in |
| Bucket Pin Reach - Maximum Lift | 12.6in |
| Turning Radius from Center - Machine Rear | 74.7in |
| Turning Radius from Center - Coupler | 57.9in |
| Reach - Maximum Lift/Dump | 30.9in |
| Turning Radius from Center - Bucket | 87.7in |
| Bucket Pin Height - Maximum Lift | 133.5in |
| Roll Back Angle | 28° |
| Maximum Reach - With Arms Parallel to Ground | 48in |
| Clearance at Maximum Lift and Dump | 105.4in |
| Length - Without Bucket | 128.7in |
| Bucket Pin Height - Carry Position | 8.7in |
| Length - With Bucket on Ground | 153.9in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Rack Back Angle - Maximum Height | 88° |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 (Optional) |
| Cooling System | 4.6gal (US) |
| Engine Crankcase | 2.4gal (US) |
| Fuel Tank | 34.5gal (US) |
| Hydraulic System | 10.8gal (US) |
| Hydraulic Tank | 6.9gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 2.9gal (US) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34gpm |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4hp |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3500psi |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gpm |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7hp |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 69.6hp |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 34gpm |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500psi |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
| Travel Speed - Forward or Reverse - Two Speed Option | 9.6mile/h |
| Travel Speed - Forward or Reverse - One Speed | 6.6mile/h |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
| Outside Cab** | 101 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Inside Cab* | 83 dB(A) |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
| Recyclability | 93% |
| Electrical |
|
| Operator Environment |
|
| Hydraulics |
|
| Power Train |
|
| Other |
|
| Mandatory Equipment |
|
| Performance Packages |
|
| Comfort Packages |
|
| Technology Packages |
|
| Radio |
|
| Product Link™ |
|
| Cooling Fan |
|
| Guarding And Sealing Packages |
|
| Optional Equipment |
|