+
Gross Power - SAE J1995 | 110hp |
Net Power - SAE 1349 | 106hp |
Displacement | 232in³ |
Stroke | 4.7in |
Bore | 3.9in |
Engine Model | Cat C3.8 DIT (turbo) |
Net Flywheel Power | 106hp |
Net Power - ISO 9249 | 107hp |
Peak Torque - 1,500 rpm - SAE J1995 | 276ft·lbf |
Rated Operating Capacity | 3700lb |
Tipping Load | 7400lb |
Breakout Force - Tilt Cylinder | 7362lb |
Breakout Force - Lift Cylinder | 6085lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
Rated Operating Capacity with Optional Counterweight | 3950lb |
Operating Weight | 9573lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
Wheel Base | 54.6in |
Height - Top of Cab | 84in |
Vehicle Width over Tires | 76in |
Ground Clearance | 10.4in |
Departure Angle | 28° |
Maximum Dump Angle | 51° |
Bumper Overhang - Behind Rear Axle | 46.2in |
Turning Radius from Center - Machine Rear | 74.7in |
Length - Without Bucket | 127in |
Reach - Maximum Lift/Dump | 29in |
Clearance at Maximum Lift and Dump | 97.4in |
Bucket Pin Height - Maximum Lift | 128.6in |
Bucket Pin Height - Carry Position | 9.3in |
Turning Radius from Center - Coupler | 57.7in |
Bucket Pin Reach - Maximum Lift | 13.5in |
Rack Back Angle - Maximum Height | 84° |
Maximum Overall Height | 161.5in |
Length - With Bucket on Ground | 155in |
Maximum Reach - With Arms Parallel to Ground | 49.1in |
Turning Radius from Center - Bucket (racked) | 90.6in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
Roll Back Angle | 28° |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
Cooling System | 4.1gal (US) |
Engine Crankcase | 3.5gal (US) |
Fuel Tank | 31.7gal (US) |
Hydraulic System | 14.5gal (US) |
Hydraulic Tank | 10.3gal (US) |
Chain Box - Each Side | 2.7gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
Standard Flow Mode - Loader Hydraulic Pressure | 3335psi |
Standard Flow Mode - Hydraulic Power - Calculated | 44hp |
Standard Flow Mode - Loader Hydraulic Flow | 23gal/min |
Note | *When equipped with Cat 400 Series work tools. |
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4061psi |
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40gal/min |
Hydraulic Flow - XE - Hydraulic Power (calculated) | 94hp |
Travel Speed - Forward or Reverse - One Speed | 7.2mile/h |
Travel Speed - Forward or Reverse - Two Speed | 10.3mile/h |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
Outside Cab*** | 104dB(A) |
Inside Cab** | 83dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Electrical |
|
Operator Environment |
|
Power Train |
|
Other |
|
Mandatory Equipment |
|
Optional Equipment |
|