Engineered for demanding work in large dozing applications, the Cat® 854 Wheel Dozer is the largest in the Cat lineup and is an ideal match for large mining operations, power-generating utilities, the general contracting industry and wherever mobility, versatility and compaction are needed. Like all Cat Wheel Dozers, the 854 is designed with durability built in, ensuring maximum availability through multiple lifecycles. With optimized performance and simplified serviceability, the 854 will allow you to move more material efficiently and safely at a lower cost per ton.
| Engine Model | Cat C32B |
| Gross Power | 907HP |
| Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 | 900HP |
| Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 | 814HP |
| Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 | 907HP |
| Emissions (Tier 2 Equivalent): Net Power ISO - 9249 | 823HP |
| Rated Speed | 1750r/min |
| Bore | 5.7in |
| Stroke | 6.4in |
| Displacement | 1958in² |
| Peak Torque - 1,200 rpm | 3139lb/ft |
| Torque Rise | 30% |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (2) | Net torque rise meets SAE J139. |
| Note (3) | No engine derating required up to 3050 m (10,000 ft) altitude. |
| Operating Weight | 224647lb |
| Transmission Type | Cat Planetary Power Shift |
| Converter Drive - Forward 1 | 4.4mile/h |
| Converter Drive - Forward 2 | 7.7mile/h |
| Converter Drive - Forward 3 | 13.2mile/h |
| Converter Drive - Reverse 1 | 4.8mile/h |
| Converter Drive - Reverse 2 | 8.4mile/h |
| Converter Drive - Reverse 3 | 14.6mile/h |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 8.1mile/h |
| Direct Drive - Forward 3 | 14.2mile/h |
| Direct Drive - Reverse 1 | 5mile/h |
| Direct Drive - Reverse 2 | 8.9mile/h |
| Direct Drive - Reverse 3 | 15.6mile/h |
| Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
| Output at 1,850 rpm and 6900 kPa (1,000 psi) | 161gal/min |
| Cylinders, Double Acting - Lift, Bore and Stroke | 177 mm × 1760 mm (0.58 ft × 5.8 ft) |
| Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 267 mm × 286 mm (0.88 ft × 0.94 ft) |
| Fuel Tank - Standard | 413gal (US) |
| Cooling System | 53gal (US) |
| Crankcase | 32gal (US) |
| Transmission | 45gal (US) |
| Differential - Final Drives - Front | 98gal (US) |
| Differential - Final Drives - Rear | 90gal (US) |
| Hydraulic System - Steering and Engine Cooling Fan - Tank Only | 77gal (US) |
| Note (1) | - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo |
| Front | Fixed |
| Rear | Trunnion |
| Brakes | Meets ISO 3540:2011 |
| Blade Capacities | 30.5 to 44.8 m3 (40 to 58.6 yd3) |
| Height - Top of ROPS | 18.25ft |
| Height - Top of Exhaust Pipe | 17.17ft |
| Height - Top of Hood | 13ft |
| Ground Clearance | 27in |
| Centerline of Front Axle to Hitch | 9.67ft |
| Centerline of Rear Axle to Edge of Bumper | 13.75ft |
| Wheel Base | 19.25ft |
| Length - With Blade on Ground | 44ft |
| Steering System - Pump | Piston, variable displacement |
| Minimum Turning Radius - Over Blade | 31ft |
| Steering System - Circuit | Pilot, load sensing |
| Total Steering Angle | 86 degrees |
| Relief Valve Setting | 5004psi |
| Operating Weight | 224647lb |
| Sound Performance | • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| ROPS/FOPS | ISO 3471:2008 and ISO 3449:2005 Level II Standards |
| Electrical And Lighting |
|
| Powertrain |
|
| Operator Environment |
|
| Safety |
|
| Service |
|
| Cooling |
|
| Cold Weather |
|
| Efficiency |
|
| Tramming |
|
| Electrical And Lighting |
|
| Powertrain |
|
| Operator Environment |
|
| Safety |
|
| Service |
|
| Blades |
|
| Cooling |
|
| Cold Weather |
|
| Machine Control And Guidance |
|
| Tires And Rims |
|
| Tramming |
|
| Sound Suppression |
|
Print
Email
your location
call us
contact us