35%
More Torque
than the previous model
The Cat® 270 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
More Torque
than the previous model
and greater lift and tilt breakout forces
featuring redesigned layout with more cab space and easier entry and exit
| Gross Power - SAE J1995:2014 | 100hp |
| Net Power - SAE 1349 | 100hp |
| Net Power - ISO 9249 | 99hp |
| Peak Torque - 1,600 rpm - SAE J1995 | 333lb/ft |
| Engine Model | Cat C3.6TA (turbocharged, aftercooled) |
| Displacement | 221in³ |
| Stroke | 4.7in |
| Bore | 3.9in |
| Note | Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternato |
| Rated Operating Capacity | 3557lb |
| Rated Operating Capacity with Optional Counterweight | 3914lb |
| Tipping Load | 7114lb |
| Breakout Force - Tilt Cylinder | 8267lb |
| Breakout Force - Lift Cylinder | 6349lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Operating Weight | 10441lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Travel Speed - Forward or Reverse - One Speed | 6.6mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | 9.6mile/h |
| Outside Cab** | 101 dB(A) |
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Recyclability | 93% |
| Wheel Base | 54.6in |
| Height - Top of Cab | 86.2in |
| Vehicle Width over Tires | 72in |
| Ground Clearance | 8in |
| Departure Angle | 23.6° |
| Maximum Dump Angle | 43.5° |
| Maximum Overall Height | 164.3in |
| Bucket Pin Reach - Maximum Lift | 12.6in |
| Turning Radius from Center - Coupler | 57.9in |
| Turning Radius from Center - Bucket | 87.7in |
| Turning Radius from Center - Machine Rear | 74.7in |
| Reach - Maximum Lift/Dump | 30.9in |
| Maximum Reach - With Arms Parallel to Ground | 48in |
| Bucket Pin Height - Maximum Lift | 133.5in |
| Bucket Pin Height - Carry Position | 8.7in |
| Roll Back Angle | 28° |
| Clearance at Maximum Lift and Dump | 105.4in |
| Length - Without Bucket | 128.7in |
| Length - With Bucket on Ground | 153.9in |
| Rack Back Angle - Maximum Height | 88° |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500psi |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gpm |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4hp |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3500psi |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 34gpm |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 69.6hp |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34gpm |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7hp |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 (Optional) |
| Cooling System | 4.6gal (US) |
| Engine Crankcase | 2.4gal (US) |
| Fuel Tank | 34.5gal (US) |
| Hydraulic System | 10.8gal (US) |
| Hydraulic Tank | 6.9gal (US) |
| Chain Box - Each Side | 2.6gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 2.9gal (US) |
| Electrical |
|
| Operator Environment |
|
| Hydraulics |
|
| Power Train |
|
| Other |
|
| Mandatory Equipment |
|
| Performance Packages |
|
| Comfort Packages |
|
| Technology Packages |
|
| Radio |
|
| Product Link™ |
|
| Cooling Fan |
|
| Guarding And Sealing Packages |
|
| Optional Equipment |
|