| Gross Power - SAE J1995:2014 | 74hp |
| Net Power - SAE 1349 | 73hp |
| Displacement | 171in³ |
| Stroke | 4.3in |
| Bore | 3.5in |
| Net Power - ISO 9249 | 73hp |
| Peak Torque - 1,600 rpm - SAE J1995 | 221lb/ft |
| Note | Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternato |
| Engine Model | Cat C2.8T (turbo) |
| Rated Operating Capacity | 2689lb |
| Tipping Load | 5378lb |
| Breakout Force - Tilt Cylinder | 6784lb |
| Breakout Force - Lift Cylinder | 5948lb |
| Rated Operating Capacity with Optional Counterweight | 2916lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical |
| Operating Weight | 7829lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical |
| Wheel Base | 43.1in |
| Height - Top of Cab | 81.9in |
| Vehicle Width over Tires | 66in |
| Ground Clearance | 7.7in |
| Departure Angle | 23° |
| Maximum Dump Angle | 46° |
| Length - With Bucket on Ground | 135in |
| Length - Without Bucket | 110.2in |
| Bucket Pin Height - Maximum Lift | 124in |
| Maximum Reach - With Arms Parallel to Ground | 32.8in |
| Turning Radius from Center - Coupler | 51in |
| Turning Radius from Center - Machine Rear | 64.9in |
| Maximum Overall Height | 155.8in |
| Bucket Pin Reach - Maximum Lift | 3in |
| Bucket Pin Height - Carry Position | 7.9in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical |
| Rack Back Angle - Maximum Height | 97° |
| Clearance at Maximum Lift and Dump | 96.2in |
| Turning Radius from Center - Bucket | 79.7in |
| Reach - Maximum Lift/Dump | 17.6in |
| Roll Back Angle | 28° |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 (Optional) |
| Chain Box - Each Side | 2.2gal (US) |
| Cooling System | 3gal (US) |
| Engine Crankcase | 2.1gal (US) |
| Fuel Tank | 24.9gal (US) |
| Hydraulic System | 9.7gal (US) |
| Hydraulic Tank | 6.9gal (US) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 30gpm |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 20gpm |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 30gpm |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58hp |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39hp |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335psi |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 71hp |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3335psi |
| Travel Speed - Forward or Reverse - One Speed | 8mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | 10.5mile/h |
| Recyclability | 94% |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
| Outside Cab** | 101 dB(A) |
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
| Electrical |
|
| Operator Environment |
|
| Hydraulics |
|
| Power Train |
|
| Other |
|
| Mandatory Equipment |
|
| Performance Packages |
|
| Comfort Packages |
|
| Technology Packages |
|
| Radio |
|
| Product Link™ |
|
| Cooling Fan |
|
| Guarding And Sealing Packages |
|
| Optional Equipment |
|