+

PM825 Cold Planer

The PM825 is a high-production, half-lane milling machine with a cutting width of 2505 mm (98.6 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

CONTENT COMING SOON
CONTENT COMING SOON

Please call for rates.

Cutting System

Milling Width 98.6in
Maximum Milling Depth 13in
Rotor Speeds 100 / 109 / 118 rpm
Number of Bits 203

Power Train

Rated Power 806HP
Engine Cat C18 twin-turbo
Maximum Travel Speed 3.7mile/h
Maximum Milling Speed 328ft/min

Weights

Operating Weight 82673lb
Transport Weight 74075lb

Dimensions

Operating Length - Conveyor Up 47.64ft
Operating Width 11.02ft
Height - Canopy 13.29ft
Maximum Truck Clearance 15.94ft
Minimum Right Cutting Radius 4.92ft
Minimum Left Cutting Radius 6.56ft
Conveyor Swing 60 degrees from center
Transport Length 40.78ft
Transport Width 9.88ft
Transport Height 9.84ft

Service Refill Capacities

Water Spray System Tank 898.2gal (US)
Cooling System 27.5gal (US)
Fuel Tank 292.7gal (US)
Engine Oil 17.2gal (US)
Hydraulic Tank 29.9gal (US)

Standard Equipment

  • Operator Environment
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • Cat Connect Technology
    • Cat Product Link
    • Cat GRADE
  • Conveyor
    • Grease tensioner
    • Material removal boost feature
  • Rotor System
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • Powertrain
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • Hydraulic System
    • Dual pump hydraulic propel system
    • Traction control
  • Service And Maintenance
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • Safety And Security
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights

Optional Equipment

  • Operator Environment
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • Cat Connect Technology
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • Conveyor
    • Dust abatement system
    • Remote camera (loading conveyor)
  • Rotor System
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • Powertrain
    • CE certificate
  • Hydraulic System
    • Water tank transfer pump
    • Fuel transfer pump
  • Service And Maintenance
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • Safety And Security
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)

Your Rentals

0
Add equipment by clicking “add to quote”