G3606 A4 Gas Engine

G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 ADEM™4 Gen 1 gas engine with ratings: 1398 bkW (1875 bhp) @ 1000 rpm and ADEM™4 Gen 2 gas engine ratings: standard power – 1454 bKW (1950 hp) and uprate power – 1499 bKW (2010 bhp) @ 1000 rpm. NSPS site compliant capable.

Key Specs

  • Maximum Rating 2065 BHP
  • Rated Speed 1000 rpm
  • Emissions Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

Benefits

Enhanced Performance

Increased horsepower boosts production while optimized uptime maximizes efficiency. Extended overhaul intervals help keep operations running longer with lower service demands.

Reduced Emissions

Lower GHG, methane, and VOC output with flexible 0.3 or 0.5 g/bhp-h NOx ratings. Integrated CCV further reduces methane emissions to support cleaner, more sustainable compression.

Simplified Reliability

Unchanged footprint ensures seamless packaging integration, supported by Dealer Network offering flexible service and customizable solutions to keep your engine performing.

Engine Specifications

Maximum Rating 2065BHP
Rated Speed 1000rpm
Emissions Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
Minimum Rating 1900BHP
Length 167.33in
Compression Ratio 9.2:1 Gen 1 (7:6:1 Gen 2)
Width 86.17in
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Height 116.16in
Displacement 7762in³
Flywheel Teeth 255
Weight - Dry 36883lb
Oil Change Interval 5000 hours
Ignition, Protection Electronic (ADEM™ A4)
Stroke 11.8in
Bore 11.8in

Capacity for Liquids

Cooling System 124gal (US)
Lube Oil System - Refill 187gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaners
    • Air Inlet Adapter
  • Control System
    • ADEM4
  • Cooling System
    • ANSI Class 150 4 inch Flange (outlet water connection)
    • ANSI Class 150 6 inch Flange (Inlet Water connection)
    • Engine driven Water pump
    • Water Jacket Outlet Regulator 88° C
  • Engine Rating
    • Engine rating and speed selection
  • Exhaust System
    • Hard heat shielded exhaust manifold
    • Vertical exhaust outlet
  • Flywheel And Flywheel Housing
    • Flywheel. SAE Standard
  • Fuel System
    • ANSI Class 150 2 inch Flange ( Customer Connect)
    • Fuel Filter
    • Gas pressure regulator
  • General
    • Paint
    • Wood Skid
  • Insrumentation
    • Basic HMI Engine Interface
  • Lube System
    • Oil pan
    • Oil filter
    • Oil supply line
    • Breathers
    • Closed Crankcase Ventilation System
    • Engine Driven oil pump
    • Front and Rear Oil Drains
    • Prelube Pump
  • Mounting System
    • Engine mounting feet (4)
    • Two lifting eyes
  • Power Take-offs
    • Damper Guard
    • Single Damper
  • Protection System
    • Crankcase explosion relief valve
  • Starting System
    • Engine Barring Device
    • Starting Motor

Optional Equipment

  • Charging System
    • Alternator
  • Exhaust System
    • Exhaust expander
    • Weld Flange
  • Fuel System
    • Fuel Connections
  • General
    • Language Decals
    • Service Pump
    • Service Tools
  • Lube System
    • Lubricating Oil
    • Oil Level Regulator
  • Mounting System
    • Mounting Plates
  • Power Take-offs
    • Stub shaft
  • Telmatic System
    • Cat Connect Technology
  • Telematic System
    • Cell - Satellite radio
    • Interconnect Harness
    • LAN Adapter
    • Product Link Extention Harness