G3306B Gas Compression Engine

Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3306B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3306B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3306B gas engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.

Engine Specifications

Minimum Rating 145BHP
Maximum Rating 211BHP
Emissions NSPS 2010
Displacement 638in³
Compression Ratio 10.5:1
Aspiration Naturally Aspirated or Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 1
Flywheel Teeth 156
Weight - Dry 2450lb
Oil Change Interval 750 hours
Ignition, Protection ADEM A4
Air/Fuel Ratio Control ADEM A4
Stroke 6in
Bore 4.8in

Capacity for Liquids

Cooling System 5.25gal (US)
Lube Oil System - Refill 11.9gal (US)

Standard Equipment

  • Air Inlet System
    • Air cleaner — intermediate duty, dry
    • Air cleaner rain cap (shipped loose)
    • Service indicator
  • Control System
    • ADEM A4
  • Cooling System
    • Thermostats and housing — full open temperature 97°C (207°F)
    • Jacket water pump — gear-driven, centrifugal, non-self-priming
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry
    • 102 mm (4 in)
    • Three-way catalyst — 1.0 g NOx and 0.5 g NOx catalyst options
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 1
    • Flywheel housing, SAE No. 1
    • SAE standard rotation
  • Fuel System
    • Air/fuel ratio control
    • Gas pressure regulator
    • Requires 10.3-34.5 kPa (1.5-5 psi) gas
    • Natural gas carburetor
  • Ignition System
    • ADEM A4 ignition
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filter
    • Oil pan, full sump
    • Oil filler and dipstick
  • Protection System
    • The following parameters include alarm and shutdown

Optional Equipment

  • Charging Alternator
    • 24V, 35A alternator
    • 24V, 35A CSA alternator*
  • Cooling System
    • Radiators
    • Jacket water pump inlet adapter
  • Exhaust System
    • Exhaust flex fitting — ANSI flange
    • Exhaust elbow
    • Exhaust flange — ANSI flange
  • Guards
    • Fan guard
    • Damper guard
  • Ignition System
    • CSA certified electronics and ignition
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 20' and 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter