C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

Dimensions & Weights

Length 43.1in
Height 35.1in
Minimum Width 31.4in
Maximum Width 33.5in
Minimum Engine Dry Weight 1609lb
Maximum Engine Dry Weight 1676lb

Engine Specifications

Configuration In-line 6, 4-stroke-cycle diesel
Emissions U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Rated Engine Speed 2300 - 2700 rpm
Bore 4.13in
Stroke 5.31in
Displacement 428in³
Aspiration Turbocharged-aftercooled aspiration
Governor Electronic (A5E2 V2 ECM)
Refill Capacity Lube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval 500 hrs
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 03 with SAE 11.5 in flywheel
Rotation Counterclockwise from flywheel end

Standard Equipment

  • Cooling System
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • Exhaust System
    • Watercooled turbocharger and exhaust manifold
  • Fuel System
    • Common rail fuel system
    • Electric fuel priming pump
  • General
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • Mounting System
    • Front and rear engine mounting brackets
  • Starting System
    • Starter motors - 12V or 24V

Optional Equipment

  • Air Inlet System
    • Various 6" water cooled exhaust elbow configurations
  • Cooling System
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • Fuel System
    • SOLAS double wall high pressure fuel lines kit
  • Lube System
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • Protection System
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • Starting System
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs