Your nearest location
EAST KNOXVILLE
865-546-1414
contact us
Home New Marine Generator Sets C7.1 (Electronic Control System)

C7.1 (Electronic Control System)

C7.1 (Electronic Control System)

Power Rating

Power Range 100 - 200 ekW

Generator Set Specifications

Frequency 50 / 60
Speed 1500 rpm / 1800 rpm

Engine Specifications

Emissions IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II
Configuration Inline 6, 4-Stroke Cycle Diesel
Displacement 428in³
Aspiration Turbocharged / Aftercooled
Governor Electronic (A5 ECM)
Bore 4.13in
Stroke 5.31in
Refill Capacity Lube Oil System w/oil filter change: 21 L / 5.6 gal
Oil Change Interval 500 hrs
Rotation from Flywheel End Counterclockwise
Cooling Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled

Generator Set Dimensions

Length 76.3 in /1,940 mm
Height 49.7 in / 1,263 mm
Engine Dry Weight 3355 lb / 1,522 kg

Generator Set Dimensions and Weights - Dependent on Generator Type

Width 38.0 in / 965 mm

Standard Equipment

  • Mounting System
    • Front and rear engine mounting brackets
  • Exhaust System
    • Watercooled turbocharger and exhaust manifold
  • Fuel System
    • Common Rail fuel system
    • Electric fuel priming pump
  • General
    • Self-tensioning multi-vee belt drive
    • Vibration damper and guard
  • Lube System
    • Open crankcase ventilation system
    • Integral engine oil cooler
  • Starting System
    • 12 V or 24 V starter motor
  • Cooling System
    • Gear-driven jacket-water pump
    • Corrosion resistant sea water aftercooler
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Fuel cooler

Optional Equipment

  • Lube System
    • Transmission gear oil cooler (engine mounted)
    • Left-hand and right-hand oil dipsticks
  • Fuel System
    • SOLAS double wall high pressure fuel lines kit
  • General
    • Glow plugs
  • Protection System
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • Cooling System
    • Cabin heater (calorifier) connections
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Jacket water heater
  • Air Inlet System
    • Various 6" water cooled exhaust elbow configurations
  • Starting System
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp