+

Cat® C7.1 Industrial Power Unit

The C7.1 Industrial Power Unit is offered in ratings ranging from 151-225 kW (202-302 hp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final, EU Stage V and Japan 2014 (Tier 4 Final) emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

Maximum Power 302HP
Maximum Torque 940lb-ft @ 1400 rpm
Rated Speed 1800-2200 rpm
Minimum Power 202HP

Emission Standards

Emissions U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final)

General

Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
Bore 4.1in
Stroke 5.3in
Displacement 427.7in³
Compression Ratio 16.5:1
Aspiration Series Turbocharged Aftercooled (TTA)
Rotation from Flywheel End Counterclockwise
Aftertreatment DOC+DPF+SCR

Power Unit Dimensions

Length 69.6in
Width 36.1in
Height 57.5in
Weight 2204lb

Aftertreatment Dimensions

Length 30.4in
Width 31.2in
Height 18.4in
Weight 198lb

Standard Equipment

  • Air Inlet
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
  • Lube System
    • Wide choice of sumps for different applications
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Eu Stage V, Japan 2014 (tier 4 Final) Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Optional Equipment