+
Your nearest location
EAST KNOXVILLE
865-546-1414
contact us
Home New Industrial Cat® C4.4 Diesel Engine

Cat?� C4.4 Diesel Engine

Cat?� C4.4 Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Power Rating

Maximum Power 200hp
Maximum Torque 609lb-ft @ 1400 rpm
Rated Speed 2200 rpm
Minimum Power 109hp

Emission Standards

Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V

General

Engine Configuration Inline 4, 4-Stroke-Cycle Diesel
Bore 4.1in
Stroke 5in
Displacement 268.5in³
Compression Ratio 16.5:1
Aspiration Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion System Direct Injection
Rotation from Flywheel End Counterclockwise
Aftertreatment DOC+DPF+SCR

Engine Dimensions - Approximate

Length 32.4in
Width 29.6in
Height 35.3in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1180lb

Aftertreatment Dimensions

Length 26.5in
Width 24.5in
Height 17.8in
Weight 143.3lb

Standard Equipment

  • Air Inlet System
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
  • Flywheels And Flywheel Housing
    • Fitted with SAE3 configuration as standard
  • Fuel System
    • Electronic high pressure common rail
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
    • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
  • General
    • Available with or without a balancer
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Optional Equipment