+

Cat® C1.1 Diesel Engine

The Cat® C1.1 Industrial Diesel Engine is offered in ratings ranging from 14.4-18.4 bkW (19.3-24.7 bhp) @ 1800-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Underground Mining Equipment.

Power Rating

Maximum Power 25HP
Maximum Torque 63lb-ft @ 1600 rpm
Rated Speed 2200-3400 rpm
Minimum Power 19.3HP

Emission Standards

Emissions U.S. EPA Tier 4 Final, EU Stage V

General

Engine Configuration In-Line 3
Bore 3in
Stroke 3.2in
Displacement 69in³
Compression Ratio 23.0:1
Aspiration Naturally Aspirated (NA)/Turbocharged (T)
Combustion System Indirect Injection
Rotation from Flywheel End Counterclockwise

Engine Dimensions - Approximate

Length 19.3in
Width 15.7in
Height 22.7in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 191lb

Standard Equipment

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
    • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
  • Lube System
    • Low profile oil pan
    • Spin-on lube oil filter
    • Lube oil pressure switch
  • Power Take Off (pto)
    • Provision for Power Take Off (PTO)
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment