Cat?� C32B HRC Diesel Engine

Building on the legacy of the C32, the C32B features strengthened
performance critical components like cylinder head, block,
crankshaft, pistons, rods, and main bearings. Its simple,
maintenance free diesel oxidation catalyst (DOC) aftertreatment
meets U.S. EPA Tier 4 Final, EU Stage V, and other equivalent
emissions standards

Power Rating

Maximum Power 1200hp
Maximum Torque 4056lb-ft @ 1200 rpm
Rated Speed 1800 rpm
Minimum Power 1000hp

Emission Standards

Emissions EU Stage V

General

Engine Configuration V-12
Bore 5.7in
Stroke 6.4in
Displacement 1958.9in³
Compression Ratio 15.0:1
Aspiration Twin Turbocharged Aftercooled (TTA)
Combustion System Direct Injection
Rotation from Flywheel End Counterclockwise
Aftertreatment DOC

Engine Dimensions - Approximate

Length 73.8in
Width 63in
Height 53.9in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 6735lb

Aftertreatment Dimensions

Length 45.5in
Width 17.3in
Height 16in
Weight 150lb

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Rear sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Paint: Caterpillar yellow, with optional colors available on request

Optional Equipment