Gas Generator G3516H

Standard Equipment

• Control Panels

  EMCP4.3

• Air Inlet

  Package Mounted Air Cleaner with service indicator Two-element single-stage air cleaner with enclosure and service indicator

• Cooling

  Jacket water and SCAC driven thermostats ANSI Class 150/DN custom flange connections for JW inlet and outlet Engine driven water pumps for jacket water and after cooler 2nd stage SCAC-Cat Flange

• Exhaust

  Center section cooled turbocharger with Cat flanged outlet Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns Dry exhaust manifolds, insulated and shielded Cat-flanged face outlet on turbocharger

• Fuel System

  Throttle plate, 24V DC actuator, controlled by GECM Electronic fuel metering valve Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

• Ignition System

  Electronic Ignition System (controlled by ADEM A4) Individual Cylinder Detonation Sensitive Timing (DST)

• Generator

  Permanent Magnet Excitiation Anti-condensation space heater Winding temperature detectors SR5 Reactive Droop Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

• General

  Crankshaft vibration damper and guard Paint - Caterpillar Yellow except rails and radiators gloss black RH Service Parts book Operation and maintenance manuals

• Governing System

  ADEM A4 4-20mA (0-5V) Speed Input

• Starting/charging

  24V starting motors

Optional Equipment

• Air Inlet

  Mounting brackets and piping Air cleaner with precleaner Heavy Duty air cleaner with precleaner

• Circuit Breakers

  No UV trip or package mounted CB Wiring Frame Mounting MP-Frame 3 Pole Bottom Cable Entry or MP- Frame 6 Pole Bottom Cable Entry 4000A, 3-Pole IEC Rated 2500/3000/3200A or 4000/5000A Neutral Current Transformer Automatic Selection Lower & Upper Covers, Extension Box Roof Cover Busbar Mounting 4000A, 3-Pole UL Rated

• Control Panels

  Remote monitoring software Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay Remote RS485, 32-light Annunciator Cat Connect: Ehternet, Satellite, Cell Telematics Cross-Current Compensation Current Transformer-- 8.7/15 kV Classes RTD Module Local/Remote PC Monitorring 16 Point/32 Light Annunciator with NFPA99-110/CSA282 Configuration Remote Monitoring & Control Synchronizing module Local alarm module

• Cooling

  Jacket water coolant heater Inlet/Outlet connections

• Exhaust

  Flange Muffler and spark-arresting muffler with ANSI companion flanges Elbow

• Generator

  Manual voltage control Generator air filter Low voltage extension box Medium and high voltage generators and attachment Cable access box Bearing temperature detectors

• Starting/charging

  24V Battery Charger 60A, 24V charging alternator (requires engine driven pumps)

• General

  US AID emblem Special paint order Battery diconnect switch Digital diagnostic tool Tool set Battery with cables and rack (shipped loose)

• Grid Code Compliance

  60 Hz: USA 50 Hz: Germany, Great Britain, Belgium, Romania, Italy, Ireland, Poland, Netherlands, Spain, France, and European Standard