G3516C Gas Generator Set

Standard Equipment

• Air Inlet

  Two-element single-stage air cleaner with enclosure and service indicator

• Control Panels

  EMCP 4.3

• Cooling

  Jacket water and SCAC driven pumps and bypass lines 2nd Stage SCAC-Cat Flange Engine driven water pumps for jacket water and aftercooler Jacket water and SCAC thermostats ANSI/DN customer flange connections for JW inlet and outlet Cat flanges on SCAC circuit

• Exhaust

  Integrated Sensing Module (ISM) Cat-flanged face outlet on turbocharger Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM Dry exhaust manifolds, insulated and shielded

• Fuel System

  24V ETR Gas Shutoff Valve Engine installed, fuel metering valve Throttle plate, 24V DC actuator, controlled by ECM Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve Fuel Filter

• Ignition System

  Individual Cylinder Detonation Sensitive Timing (DST)  Electronic Ignition System (controlled by ECM)

• Fuel System

  Electronic fuel metering valve

• Generator

  Anti-condensation space heater Busbar connections Class H Insulation & Class F temperature rise Reactive Droop Permanent Magnet Excitation 3-phase brushless, salient pole Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control SR4B Winding temperature detectors

• General

  RH Service Operation and maintenance manuals Crankshaft Vibration Damper and Guard Parts Book

• Starting/charging

  24V starting motors

Optional Equipment

• Air Inlet

  Vertical, horizontal dual element air cleaner Enclosure mounting brackets and piping Air cleaner with precleaner

• Control Panel

  Local NFPA99-110 Alarm Module w/LEDs Synchronizing Module Remote 24V 8/16 Light Annunciator Engine Failure Relay PL1000E/PL1000T Communications Module Custom 8-Light Alarm Module

• Cooling

  Inlet/Outlet connections Jacket water coolant heater Aftercooler air lines, aftercooler core replacement

• Exhaust

  Flexible Fittings 14" Flange Kit 406 mm Elbow Kits 406 mm flange kits Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges 16" Spark Arresting Muffler 356-406mm Flange and Exhaust Expander 15/18/25 dBA Muffler Attenuation

• Fuel System

  207-276kPa, 30-40 psi gas knockdown regulator 14-69 kPa (2-10 psi) gas pressure regulator 24VDC Gas Shutoff Valve, Gas Knockdown Regulator Fuel Filter, Gas Filter

• Generator

  Cable access box 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT) Medium and high voltage generators and attachment 480/4160/13200 Volt Generator Options (60 Hz) Generator air filter Bearing temperature detectors European Bus Bars 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz) Annunciator Modules Generator Removal Low voltage extension box

• Governing System

  Load share module

• General

  Special paint order Tool set US AID Emblem Barring group Digital diagnostic tool

• Starting/charging

  60A, 24V charging alternator (requires engine driven pumps) Battery removal 20A battery charger Battery disconnect switch Battery with cables and rack (shipped loose)