C280-12 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Key Specs

  • Maximum Rating 3640 ekW (60Hz), 4850 kVA (50Hz)
  • Minimum Rating 3300 ekW (60Hz), 4400 kVA (50Hz)
  • Emissions/Fuel Strategy EPA Tier 4 Final, IMO Tier 2

Benefits

Over 200,000,000

Operating hours

at Global locations

Up to 10%

Better Fuel Economy

Demonstrated savings

Over 20%

Reduction in Service Time

Two inspection ports per cylinder, segmented camshafts and individual heads ease service

Generator Set Specifications

Maximum Rating 3640 ekW (60Hz), 4850 kVA (50Hz)
Minimum Rating 3300 ekW (60Hz), 4400 kVA (50Hz)
Emissions/Fuel Strategy EPA Tier 4 Final, IMO Tier 2
Frequency 50 / 60 Hz
Speed 900 / 1000 rpm
Duty Cycle Prime, Continuous

Engine Specifications

Engine Model C280-12, V-12,4-Stroke Water-Cooled Diesel
Bore 11in
Stroke 11.8in
Displacement 13524in³
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)

Generator Set Dimensions

Length - Maximum 404in
Width - Maximum 99.62in
Height - Maximum 156.6in
Dry Weight - Genset (maximum) 112690lb

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

Generator

  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency

Worldwide Product Support

  • Cat dealers provide extensive post-sale support including maintenance and repair agreements.
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S��?�O��?�S��?��?��? program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

Full Range of Attachments

  • Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation

Standard Equipment

  • Air Inlet System
    • Air cleaner
    • Air inlet shutoff
    • Breather, crankcase, top-mounted
    • Turbocharger, watercooled, engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air cleaner
    • Air inlet shutoff
    • Breather, crankcase, top-mounted
    • Turbocharger, watercooled, engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    -->
  • Cooling System
    • Front mounted turbos
    • Jacket water thermostats
    • Water temperature regulator
    • Engine coolant water drains
    • Three-bundle oil cooler
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by Dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil filler and dipstick
    • Centrifugal oil filters with single shutoff
    • Crankcase explosion relief valves
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Service side engine mounted on cylinder block inspection covers
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Vane type air starter
    • Two motors, engine mounted at rear, on left side
    • Line group for single point custom connection
    • Air silencer
  • General:
    • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
    • Paint, Caterpillar yellow

Optional Equipment

  • Air Inlet System
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
    • Air cleaner louver assembly
    • Vertical support bracket
    • Air inlet adapter
  • Cooling System
    • Expansion tank
    • Heating aids
    • Cooling system aids
    • Heat exchanger for single circuit
    • Auxiliary water pump
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel priming pump
    • Fuel system connections
    • Duplex primary fuel strainer
  • Generator System
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
    • Class F insulation
    • 3 Phase, six leads, WYE
  • Governor System
    • Battery backup/power supply
    • Electronic/actuators
    • 723 Plus
    • 230 UA
    • EGB actuator
    • Digital programmers
  • Lube System
    • Lube ANSI adapter (Emergency connection)
    • Oil pan drain valve
  • Mounting System
    • Spring type vibration isolators
    • Non-vertically restrained
    • Isolator
    • Vertically restrained
  • Starting / Charging System
    • Compressed air flex hose
    • Turbine type air starters
    • Redundant air starters
    • Pressure reducing valve
  • General:
    • Custom paint colors