C1.1 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Key Specs

  • Standby Rating 7.5/9.5 kVA
  • Prime Power Rating 6.8/8.5 kVA
  • Emissions/Fuel Strategy EU Stage IIIA

Benefits

Over 1000 Hour

Continuous Run Time

Continuous Run Time

Remote Connectivity 24/7/365

Monitoring

Cat Connect option ensures your generator set is always ready to start and performing as expected

Suitable for Harsh

& testing environments

& testing environments

Generator Set Specifications

Standby Rating 7.5/9.5 kVA
Prime Power Rating 6.8/8.5 kVA
Emissions/Fuel Strategy EU Stage IIIA
Voltage 110 to 415 Volts
Frequency 50 Hz
Speed 1500 rpm
Duty Cycle Standby, Prime

Engine Specifications

Engine Model C1.1, In-line 4 4-cycle diesel
Bore 3in
Stroke 3.2in
Displacement 69in³
Compression Ratio 23.0:1
Aspiration Naturally Aspirated
Fuel System Indirect Injection
Governor Type Mechanical

Generator Set Dimensions

Length - Maximum 55.1in
Width - Maximum 24.4in
Height - Maximum 39.2in

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meetsNFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

M-Frame Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

GCCP 1.3 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
  • Image may not be a representative of actual product

Cooling System

  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

One Safe Source

  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

  • Air Inlet System
    • Air cleaner; light duty with disposable element
  • Control Panel
    • GCCP1.3 Control panel
  • Cooling System
    • Caterpillar extended life coolant
    • Coolant drain line with valve
    • Fan drive, battery charging alternator drive
    • Radiator and cooling fan with guards
  • Exhaust System
    • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
  • Fuel System
    • Base, formed steel with single wall integral 8-hour fuel tank
    • Standard open set fuel tank/base supplied
  • General
    • Engine and alternator pre-paint, Caterpillar yellow
  • Generators And Generator Attachments
    • 12 Leads
    • Circuit breaker, IEC, 3 pole, mounted in tower panel
    • IP23 Protection
    • Segregated low voltage (AC/DC) wiring panel
    • Tower panel, IP22, bottom cable entry
    • Voltage regulator (single phase sensing)
  • Governing System
    • Mechanical governing system
  • Lube System
    • Lubricating oil
    • Oil drain line with valve
  • Mounting System
    • Anti-vibration mounts
    • Captive linear vibration isolators between base and engine-generator
    • Includes lifting provisions and termination points for coolant
    • Skidbase as standard
  • Starting / Charging System
    • 12 Volt battery with rack and cables

Optional Equipment

  • Alternator Options
    • Coastal insulation protection
  • Certificates
    • European upgrade to STD set for CE certificate
    • Global certification for CIS
  • Circuit Breakers
    • 4 Pole Circuit breaker
    • Padlockable breaker device
  • Control Panel
    • Battery charger
    • Emergency stop with key
  • Cooling System
    • Coolant heater
  • Enclosures
    • Single point lift for enclosure
    • Sound attenuated enclosure (GALV)
  • Fuel System
    • Low fuel level alarm
  • General
    • Packing case - canopied set
    • Packing case - compact set
    • Radiator stone guard
  • Mounting Options
    • Battery removal
    • Industrial silencer removal
    • Silencer installation kit
  • Special Test And Inspection
    • PGS Test report @ 1.0 power factor