+
Your nearest location
EAST KNOXVILLE
865-546-1414
contact us
Home New Diesel Generator Sets 3606 Generator Set (Medium Speed)

3606 Generator Set (Medium Speed)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Maximum Rating 2688 kVA
Minimum Rating 1775 kVA
Emissions/Fuel Strategy Low Fuel Consumption
Frequency 50 Hz
Speed 750 & 1000 rpm
Duty Cycle Continuous

Engine Specifications

Engine Model 3606 I-6, 4-Stroke Water-Cooled Diesel
Bore 11in
Stroke 11.8in
Displacement 6762in³
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)

Generator Set Dimensions

Length - Maximum 404in
Width - Maximum 99.62in
Height - Maximum 156.6in
Dry Weight - Genset (maximum) 74970lb

Standard Equipment

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    -->
  • Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water

Optional Equipment

  • Air Inlet System
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
    • Air inlet adapter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Air cleaner
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Cooling system aids
    • Heating aids
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Duplex primary fuel strainer
    • Fuel priming pump
  • Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
  • Governor System
    • Electronic/actuators
    • Digital programmers
    • 2301 A load share
    • EGB actuator
    • Battery backup/power supply
    • 723 Plus
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Non-vertically restrained
    • Spring type vibration isolators
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Compressed air flex hose
    • Pressure reducing valve
  • General:
    • Custom paint colors