3516 Diesel Generator Set

Standard Equipment

• Air Inlet System

  Air cleaner; single element canister type

• Control Panels

  Accessory module data link Low coolant level Environmental sealed front face EMCP 4.2B 6 Customer programmable digital inputs Communications: Load histogram feature Overspeed Alarm acknowledge kW-hr (total) 24 Volt DC operation Over/under voltage (27/59) 1 programmable relay outputs (Form C) kVAr-hr (total) Emergency stop pushbutton PLC functionality Speed adjust Lamp test Auto/start/stop control Over/under frequency (81 o/u) Generator phase sequence Revers Power (kW) (32) Oil pressure (psi, kPa or bar Coolant temperature RPM Overcurrent (50/51) IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min / max exciter. Limiter and exciter diode monitor Controls: Number of I/O varies on options selected Power factor (per phase & average) 0 True RMS AC metering, 3-phase, +/-2% accuracy kVA (per phase, average & percent) Serial annunciator module data link Customizable screens Generator mounted - rear facing kW (per phase, average & percent) Text alarm/event descriptions DC volts Low oil pressure Controls: Speed adjust - Auto/start/stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy Reverse reactive power (kVAr) (32RV Frequency (Hz) Low coolant temperature 3 Analog inputs Cat connect kVAr (per phase, average & percent) Warning/shutdown with common LED indication of shutdowns for: Engine cycle crank Failure to start (overcrank) Programmable protective relaying functions: Emergency stop Customer data link (Modbus RTU Engine cool-down timer Volts (L-L & L-N) Amps (per phase & average) Operating hours High coolant temperature Digital indication for: 1 programmable digital outputs 4 programmable relay outputs (Form A)

• Cooling System

  Certified standard PGS provided

• Exhaust System

  Flanged faced outlet(s) Dry exhaust manifold

• Fuel System

  Secondary fuel filters Fuel cooler; not included with packages without radiator Flexible fuel lines - shipped loose Fuel priming pump

• General

  Right hand servicing Flywheel and flywheel housing - SAE No. 00 SAE standard rotation

• Generator And Attachments

  NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby) NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby) Winding temperature detectors Winding temperature detectors Permanent magnet excitation (PMG) Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby) Six lead Permanent magnet excitation (PMG) Internal excitation (IE) 3 Phase brushless, Salient pole Winding temperature detectors Medium voltage: Random wound Anti-condensation space heater Low voltage: High voltage: Busbar connections, top center mounted, top cable entry Form wound Busbar connections, right side extension box, bottom cable entry Form wound NEMA standard hole pattern NEMA standard hole pattern

• Governing System

  ADEM A3

• Literature

  Parts book

• Lubrication System

  Fumes disposal Lubricating oil Gear type lube oil pump Oil filter, filler and dipstick Oil drain lines and valve Integral lube oil cool

• Mounting System

  Rails - engine/generator/radiator mounting Anti-vibration mounts (shipped loose) Rubber anti-vibration mounts - shipped loose

• Starting System

  Battery and battery rack w/cables 45 Amp Charging alternator Battery disconnect switch 24 Volt electric starting motor

Optional Equipment

• Control System

  Controller: EMCP 4.2B Local annunciator module: [ ] NFPA 110 [ ] Custom

• Air Inlet System

  Dual element air cleaner Single element filter

• Cooling System

  Standard ambient radiators Coolant Optional installed ATAAC radiators Optional installed radiators Water level switch gauges Standard ambient ATAAC radiators

• Engine Options

  Starting motors: [ ] Standard [ ] Heavy duty Batteries: [ ] Standard (1400 CCA) [ ] Heavy Duty (2800 CCA) Starting aids: [ ] 220V 50 Hz Jacket water heater Battery charger: [ ] 10A [ ] 20A [ ] 35A Air cleaner: [ ] Single element air cleaners [ ] Dual element air cleaners [ ] Heavy duty air cleaners Muffler: [ ] Industrial Grade

• Crankcase System

  No explosion relief valves Ventilation system Explosion relief valves

• Alternators

  Temperature rise (over 40°C ambient): [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C

• Exhaust System

  Y Adapters Tier 4 clean emissions module Tier 4 dosing cabinet Elbows Tier 4 clean emission MOD Kits Exhaust offset Flanges Flange and exhaust expanders Flexible fittings Mufflers Clean emission parts

• Fuel System

  Fuel priming pumps (Tier 4) - Manual or electric Primary fuel filter

• General

  US aid emblem Special paint (Colors other than Caterpillar yellow or high performance paints) The following options are based on regional and product configuration: UL 2200 package Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

• Generators And Attachments

  High voltage: 12470, 13200, 13800 volts, 3 phase 1800 rpm,FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame Generator conversion Low / Medium voltage: 380, 440, 480, 600 volts, 3 phase 1800 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame Thermostat for space heater Low / Medium voltage: 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 Phase 1800 RPM, FW, PM, No. of Leads = 6, Pitch = .6667: 1600, 1800 Frame Alternator air cleaner Differential current transformers (DCT) High voltage: 6300, 6600, 6900 volts, 3 phase 1800 rpm, FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame Differential current transformers (DCT) 8.7 kV and 15 kV classes Space heater kit

• Power Termination

  Circuit breaker operation: [ ] Electrical Circuit breaker rating: [ ] 2000A [ ] 2500A [ ] 3200A [ ] 4000A Circuit breaker trip unit: [ ] LSI [ ] LSIG [ ] LSIG-P Power termination: [ ] Busbar [ ] Circuit breaker

• Extended Service Contract (esc)

  Extended Service Contract (ESC): [ ] 2 Year [ ] 3 Year [ ] 5 Year

• Instrumentation

  Pyrometer and Thermocouples

• Lubrication System

  Lube oil in standard sump Prelube pumps Oil level regulator

• Mounting System

  Puck style low efficiency isolators Spring type vibration isolators IBC vibration isolators

• Power Connections

  Ground cables between generator and terminal box Neutral ground connections 2700 Frame, four lead, four terminal Rear power connections Right side power connections Left side power connections Low voltage Circuit breakers Center post busbars

• Special Tests / Reports

  Generator test report OSHPD Certification Canadian Standards Association certification PGS Test report @ 1.0 power factor IBC Certification Fuel consumption test Generator set fuel consumption test PGS Test report @ 0.8 power factor Standard engine test charge Torsional vibration analysis reports

• Starting And Charging

  Electric starting motors Air pressure regulator Starter cover Air starting motors 24 Volt battery set - Dry 10, 20, 35 and 50 Amp Battery chargers Jacket water heaters Engine barring device

• Extended Service Coverage

  Platinum, Gold and Silver coverage