Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.
| Engine Model | Cat® 3516E |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent |
| Engine Power - ISO 14396 | 1847HP |
| Gross Power - SAE J1995 | 1870HP |
| Net Power - SAE J1349 - Standard Ambient | 1739HP |
| Net Power - SAE J1349 - High Ambient | 1696HP |
| Bore | 6.7in |
| Stroke | 8.5in |
| Displacement | 4766in³ |
| Peak Torque - 1,200 rpm - SAE J1995 | 8549lb/ft |
| Torque Rise | 39% |
| Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
| Note (3) | The gross power advertised is with the fan at maximum speed. |
| Operating Weight - Standard | 543772lb |
| Bucket Capacity Range | 17.2-43.6 m3 (22.3-57 yd3) |
| Operating Weight - High Lift | 547675lb |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 60ton (US) |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | 50ton (US) |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | 55ton (US) |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | 50ton (US) |
| Note | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
| Cat Truck Match - Standard | 785/789 |
| Cat Truck Match - High Lift | 789/793/794 |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 4.6mile/h |
| Forward - 2 | 8mile/h |
| Forward - 3 | 13.6mile/h |
| Reverse - 1 | 5mile/h |
| Reverse - 2 | 8.8mile/h |
| Reverse - 3 | 14.9mile/h |
| Direct Drive - Forward 1 | Lock-up disables |
| Direct Drive - Forward 2 | 8.7mile/h |
| Direct Drive - Forward 3 | 15.2mile/h |
| Direct Drive - Reverse 1 | Lock-up disables |
| Direct Drive - Reverse 2 | 9.6mile/h |
| Direct Drive - Reverse 3 | 16.8mile/h |
| Note | Travel speeds based on 58/85-57 tires. |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Maximum Flow at 1,700 rpm Engine Speed | 541gal/min |
| Relief Valve Setting - Lift/Tilt | 5004psi |
| Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) |
| Pilot System | Open Loop and Pressure Reducing |
| Rack Back | 4.9s |
| Raise | 12.6s |
| Dump | 3.1s |
| Lower Float Down | 4.2s |
| Fuel Tank - Standard | 856gal (US) |
| Fuel Tank - With 24 hr Attachment | 1414gal (US) |
| Cooling System | 138gal (US) |
| Engine Crankcase | 76gal (US) |
| Transmission | 110gal (US) |
| Differential - Final Drives - Front | 220gal (US) |
| Differential - Final Drives - Rear | 200gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | 270gal (US) |
| Hydraulic Tank - Steering and Braking | 100gal (US) |
| Oil Renewal System (ORS)* | 20gal (US) |
| Note | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 9° |
| Ambient Capability Hydraulically Driven Demand Fan - Standard | 109.4°F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 131°F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 127.4°F |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 74dB(A) |
| Machine Sound Level (ISO 6395:2008) | 119dB(A) |
| Note | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 73dB(A) |
| Machine Sound Level (ISO 6395:2008) | 117dB(A) |
| Note | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
| Steering System - Circuit | Pilot, Load Sensing |
| Steering System - Pump | Piston, Variable Displacement |
| Total Steering Angle | 80 degrees |
| Steering Cycle Times - Low Idle | 7.6s |
| Steering Cycle Times - High Idle | 4.3s |
| B-Pin Height - Maximum Lift | 28.8ft |
| Clearance at Maximum Lift | 19.8ft |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | 21.9ft |
| Ground to Bumper Clearance | 4.4ft |
| Ground to Center of Axles | 6ft |
| Ground to Lower Hitch Clearance | 2.9ft |
| Ground to Top of Exhaust Stacks | 23.2ft |
| Ground to Top of Hood | 18.6ft |
| Ground to Top of ROPS | 23.4ft |
| Maximum Overall Height - Bucket Raised | 39.3ft |
| Maximum Overall Length | 64.6ft |
| Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | 59.5 degrees |
| Rack Back Angle - Carry | 47.7 degrees |
| Rack Back Angle - Ground Level | 39.7 degrees |
| Reach - Maximum Lift | 9.6ft |
| Rear Axle - Centerline to Bumper | 20.4ft |
| Tread Width | 14.1ft |
| Wheel Base | 22.3ft |
| Width - Over Tires - With Bulge | 18.8ft |
| B-Pin Height - Maximum Lift | 31.6ft |
| Clearance at Maximum Lift | 22.6ft |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | 24.2ft |
| Ground to Bumper Clearance | 4.4ft |
| Ground to Center of Axles | 6ft |
| Ground to Lower Hitch Clearance | 2.9ft |
| Ground to Top of Exhaust Stacks | 23.2ft |
| Ground to Top of Hood | 18.6ft |
| Ground to Top of ROPS | 23.4ft |
| Maximum Overall Height - Bucket Raised | 42.1ft |
| Maximum Overall Length | 66.9ft |
| Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | 59.4 degrees |
| Rack Back Angle - Carry | 53.5 degrees |
| Rack Back Angle - Ground Level | 45 degrees |
| Reach - Maximum Lift | 9.4ft |
| Rear Axle - Centerline to Bumper | 20.4ft |
| Tread Width | 14.1ft |
| Wheel Base | 22.3ft |
| Width - Over Tires - With Bulge | 18.8ft |
| Brakes | ISO 3450:2011 |
| Power Train |
|
| Linkage |
|
| Electrical |
|
| Operator Environment |
|
| Safety |
|
| Machine Control And Guidance |
|
| Fuel Tank |
|
| Cooling |
|
| Ground-level Service Center |
|
| Service |
|
| Efficiency |
|
| Power Train |
|
| Linkage |
|
| Operator Environment |
|
| Safety |
|
| Cold Weather |
|
| Machine Control And Guidance |
|
| Fuel Tank |
|
| Cooling |
|
| Rims And Tires |
|
| Spare Rims |
|
| Service |
|
| Sound |
|
Print
Email
your location
call us
contact us