+
The new 966M XE Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. The XE technology improves fuel efficiency by up to 25% over the M Series standard configuration and up to 35% over the K Series standard configuration.** Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards. **Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
Net Power - ISO 9249 | 298HP |
Emissions | Tier 4/Stage IV |
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
Maximum Net Power - 1,600 rpm - ISO 9249 | 298HP |
Peak Gross Torque - 1,200 rpm - SAE J1995 | 1275ft·lbf |
Maximum Net Power - 1,600 rpm - SAE J1349 - Metric | 302HP |
Maximum Net Power - 1,600 rpm - ISO 9249 - Metric | 302HP |
Maximum Net Power - 1,600 rpm - SAE J1349 | 298HP |
Engine Model | Cat C9.3 |
Peak Gross Torque - 1,200 rpm - ISO 14396 | 1260ft·lbf |
Maximum Net Torque - 1,200 rpm | 1193ft·lbf |
Displacement | 568in³ |
Operating Weight | 51176lb |
Note | Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering, |
Bucket Capacities | 3.20-7.40 m³ (4.19-9.68 yd³) |
Hydraulic Cycle Time - Total | 10.1s |
Implement System - Maximum Operating Pressure | 4496psi |
Implement System - Maximum Pump Output at 1,600 rpm | 102gal/min |
Implement Pump Type | Variable Displacement Piston |
Hinge Pin Height at Maximum Lift | 15.75ft |
Centerline of Rear Axle to Hitch | 5.83ft |
Height - Top of Hood | 9.25ft |
Wheel Base | 11.67ft |
Ground Clearance | 1.42ft |
Centerline of Rear Axle to Edge of Counterweight | 8.17ft |
Lift Arm Clearance at Maximum Lift | 13.58ft |
Height - Top of Exhaust Pipe | 11.58ft |
Hinge Pin Height at Carry | 2.58ft |
Tread Width | 7.33ft |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Maximum Width over Tires | 9.83ft |
Overall Length - Without Bucket | 26.58ft |
Rack Back - Maximum Lift | 71 degrees |
Rack Back - Carry Height | 49 degrees |
Rack Back at Ground | 39 degrees |
Height - Top of ROPS | 11.75ft |
Rack Back at Ground | 42 degrees |
Hinge Pin Height at Carry | 2.08ft |
Overall Length - Without Bucket | 23.92ft |
Height - Top of Exhaust Pipe | 11.58ft |
Ground Clearance | 1.42ft |
Height - Top of ROPS | 11.75ft |
Lift Arm Clearance at Maximum Lift | 11.92ft |
Hinge Pin Height at Maximum Lift | 13.92ft |
Wheel Base | 11.67ft |
Height - Top of Hood | 9.25ft |
Maximum Width over Tires | 9.83ft |
Centerline of Rear Axle to Edge of Counterweight | 7.17ft |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Tread Width | 7.33ft |
Centerline of Rear Axle to Hitch | 5.83ft |
Rack Back - Carry Height | 50 degrees |
Rack Back - Maximum Lift | 62 degrees |
Note (1) | For a machine configuration as defined under "Weight." |
Static Tipping Load - Full 37° Turn - With Tire Deflection | 32329lb |
Breakout Force | 38984lbf |
Static Tipping Load - Full 37° Turn - No Tire Deflection | 34873lb |
Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 107dB(A) |
Note (3) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 67dB(A) |
Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
Note (2) | **For machines in European Union countries and in countries that adopt the EU Directives. |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 105 LWA*** |
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 67dB(A) |
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 76 dB(A)* |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius. |
Forward - 1 | 4.1mile/h |
Forward - 4 | 24.5mile/h |
Forward - 3 | 13.5mile/h |
Forward - 2 | 7.7mile/h |
Reverse - 1 | 4.1mile/h |
Reverse - 2 | 7.7mile/h |
Reverse - 3 | 17.1mile/h |
DEF Tank | 4.4gal (US) |
Cooling System | 19gal (US) |
Crankcase | 6.5gal (US) |
Hydraulic Tank | 33gal (US) |
Differential - Final Drives - Front | 15.1gal (US) |
Differential - Final Drives - Rear | 15.1gal (US) |
Transmission | 16.6gal (US) |
Fuel Tank | 79.8gal (US) |
Emissions | Tier 4/Stage IV |
Bucket Capacities | 3.20-7.40 m³ (4.19-9.68 yd³) |
Note |
|
Power Train |
|
Hydraulics |
|
Electrical And Lighting |
|
Operator Environment |
|
Computerized Monitoring System |
|
Cat Connect Technologies |
|
Linkage |
|
Fluids |
|
Other Standard Equipment |
|
Note |
|
Power Train |
|
Hydraulics |
|
Electrical And Lighting |
|
Operator Environment |
|
Cat Connect Technologies |
|
Linkage |
|
Fluids |
|
Starters, Batteries, And Alternators |
|
Work Tools |
|
Other Optional Equipment |
|
Optional Application Specific Configurations |
|