Home New Small Wheel Loaders 926M Aggregate Handler Small Wheel Loader

926M Aggregate Handler Small Wheel Loader

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Buy Used

Photos
Videos
360 View

Specifications
Standard/Optional Features

Engine

Maximum Gross Power	168HP
Bore	4in
Stroke	5in
Displacement	427in³
Engine Model	Cat® C7.1
Emissions	The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	586ft·lbf
Note (2)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	573ft·lbf
Note (3)	No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	601ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	588ft·lbf
Note (1)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Rated Gross Power - ISO 14396	168HP
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)	1800r/min
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)	168HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)	160HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)	1600r/min
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)	170HP
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	164HP
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	163HP
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)	587ft·lbf
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)	162HP
Maximum Rated Gross Power - ISO 14396 (metric)	170HP
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156HP
Net Power (Standard Power Mode: Range 1-3*)	1600r/min
Net Power (Performance Power Mode: Range 1-4)	1800r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156HP
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*)	572ft·lbf
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158HP

Weights

Operating Weight	28577lb
Note (2)	~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Operating Weight (2)	12 963 kg (28,577 lb)~
Operating Weight (1)	12 891 kg (28,418 lb)**
Note (1)	**Aggregate Handler machine equipped with full counterweight and optional guards.

Buckets

Bucket Capacities

2.5-5.0 m3 (3.3-6.5 yd3)

Cab

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 LEVEL II
Note (1)	* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Declared Sound Levels	Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*

Service Refill Capacities

Cooling System	7.9gal (US)
Fuel Tank	51.5gal (US)
Diesel Exhaust Fluid (DEF) Tank	5gal (US)
Engine Crankcase	5.3gal (US)
Hydraulic Tank	23.8gal (US)
Hydraulic System - Including Tank	42.3gal (US)
Rear Axles	6.6gal (US)
Front Axles	6.9gal (US)
Transmission - Gear Box	2.2gal (US)

Steering

Steering Cylinder, Double Acting - Stroke	17.2in
Note (1)	Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump	3500psi
Maximum Flow - Steering Pump	34gal/min
Steering Cylinder, Double Acting - Bore Diameter	2.8in
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed	2.4s
Steering Cylinder, Double Acting - Rod Diameter	1.6in
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited	2.8s

Loader Hydraulic System

Relief Pressure - Tilt Cylinder	4061psi
Tilt Cylinder, Double Acting - Stroke	20.3in
Maximum Flow - Implement Pump	40gal/min
Maximum Working Pressure - Implement Pump	3771psi
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time	9.6/10.5 seconds
Tilt Cylinder, Double Acting - Bore Diameter	5.5in
Tilt Cylinder, Double Acting - Rod Diameter	3in
Lift Cylinder, Double Acting - Rod Diameter	2.4in
Lift Cylinder, Double Acting - Bore Diameter	4.3in
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	40gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3771psi
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	40gal/min
Lift Cylinder, Double Acting - Stroke	28.7in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)	1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)	5.5/6.2 seconds
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1)	Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (3)	* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)	2.6/2.6 seconds

Transmission

Forward and Reverse - Range 2	8mile/h
Forward and Reverse - Range 3	17mile/h
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 4	25mile/h
Note	* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Power Train

Rear Axle - Traction Aid - Optional	Limited slip differential
Note (3)	*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Front Axle	Fixed
Front Axle - Traction Aid*	Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25	± 13.5 degrees
Note (2)	Offset rims available to meet European roading requirements.
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65	± 10.5 degrees
Note (1)	Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Brakes - Service	Inboard wet disc
Rear Axle	Oscillating
Brakes - Parking	Spring applied hydraulically released

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Operating Specifications

Note (1)	**Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (2)	8148 kg (17,962 lb)~
Full Turn Tip Load (1)	8047 kg (17,740 lb)**
Note (2)	~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Sustainability

Recyclability

94%

Standard Equipment

Power Train

Axle Duo-Cone^™ seal guards
Auto idle shut down feature
Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)
Coded start (requires secondary display)
Differential lock in front axle
Enclosed wet disc full hydraulic brakes
Hydraulically driven demand cooling fan
Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
Parking brake, electric
Single plane cooling package wide six fins per inch density
Oil sampling ports
Throttle lock and max speed limiter

Hydraulics

Automatic lift lower and tilt kickouts, adjustable in-cab
Bucket and fork modes, adjustable in-cab
Cylinder damping at kickout and mechanical end stops
Fine mode control (fast, medium, slow)
Hydraulic response setting (fast, medium, slow)
Load sensing hydraulics and steering
Seat-mounted hydraulic joystick controls

Electrical

Alternator, 115 amp, heavy duty
Batteries, 1,000 CCA (2) 24V system, disconnect switch
Back-up alarm
Emergency shutdown switch
Halogen work and roading lights, LED rear tail lights
Product Link PRO with three year subscription
Remote jump start post
Resettable main and critical function breakers

Operator Environment

75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
Automatic temperature control
Cab, pressurized
Camera, rearview
External heated mirrors with lower parabolic
Ground level cab door release
Hydraulic control lockout
Mirror, single
Lunch box storage
Radio ready speakers
Rear window defrost, electric
Column mounted multi function control – lights, wipers, turn signal
Tilt and telescopic steering wheel
Tinted front glass
Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
Suspension seat, fabric

Other Standard Equipment

Large-access enclosure doors with adjustable close/open force
Cat optimized Z-bar linkage with parallel lift
Recovery hitch, with pin
Remote mounted lubrication points
Lockable compartments and enclosures

Optional Equipment

Autolube, integrated in secondary display
Auxiliary flow, third and fourth function
Differential, limited slip, rear
Beacon light, strobe
Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Counterweight, additional options
Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guarding packages
Linkage, high lift
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Rear Object Detection
Ride Control System, adjustable through secondary display
Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
Steering
– Dual mode and secondary
Tire Pressure Monitoring (TPM)