914 Small Wheel Loader

The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Key Specs

  • Maximum Gross Power 110 hp
  • Operating Weight 19103 lb
  • Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)

Benefits

10%

Power Boost

Power Boost

Big Options

Compact Loader

Compact Loader

9%

More Capacity*

*914 Aggregate Handler only.

Engine

Maximum Gross Power 110hp
Rated Net Power - Rated Engine Speed 2200r/min
Maximum Gross Power - Rated Engine Speed 1800r/min
Maximum Gross Power - ISO 14396 (metric) 112hp
Rated Net Power - SAE J1349 99hp
Rated Net Power - ISO 9249 98hp
Maximum Gross Torque - SAE J1995 335ft·lbf
Maximum Gross Torque - ISO 14396 332ft·lbf
Maximum Net Torque - SAE J1349 329ft·lbf
Maximum Net Torque - ISO 9249 327ft·lbf
Displacement 220in³
Bore 3.85in
Stroke 4.72in
Engine Model Cat C3.6
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396 110hp

Weights

Operating Weight 19103lb

Buckets

Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Sustainability

Recyclability 95%

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Service Refill Capacities

Cooling System 5.7gal (US)
Fuel Tank 43.6gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 2gal (US)
Hydraulic System - Including Tank 25.9gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8gal (US)
Engine Crankcase 2.6gal (US)
Hydraulic Tank 14.5gal (US)
Transmission 0.8gal (US)
Axles - Front Center Differential 2gal (US)

Loader Hydraulic System

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046psi
Hydraulic Cycle Time - Total Cycle Time 12.5s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24gpm
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s
Relief Pressure - Tilt Cylinder 4931psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32gpm
Maximum Working Pressure - Implement Pump 4061psi
Hydraulic Cycle Time - Rackback 2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046psi
Maximum Flow - Implement Pump 39gpm

Transmission

Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 25mile/h
Forward and Reverse - Speed Range 1* 6.3mile/h
Forward and Reverse - Speed Range 2* 12.5mile/h

Tires

Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Standard Size 17.5 R25 L2 XTLA
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Axles

Rear Oscillating ±11 degrees; Locking differential (Standard)
Front Fixed; Locking differential (standard)

Steering

Maximum Flow - Steering Pump 22gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8s
Maximum Working Pressure - Steering Pump 3263psi
Steering Articulation Angle - Each Direction 40°

Sustainability

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
  • Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
  • Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
  • Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
  • Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
  • Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
  • Match the wheel loader to the job using power modes including Eco Mode that reduces engine speed and hydraulic power for applications not requiring full hydraulic power - helping you to reduce fuel consumption and greenhouse gas emissions.
  • Programmable sensors and kickouts help you work quicker and more comfortable reducing wear on machine and the attachment

Standard Equipment

Optional Equipment