+

R1300G Underground Mining Loader

The R1300G underground loader is designed for high production, low cost-per-ton loading and tramming in underground mining applications. Compact design with agile performance, rugged construction and simplified maintenance ensures excellent productivity, long life and low operating costs.<br>Engineered for performance, designed for comfort, built to last.

Engine

Engine Model Cat® 3306B DITA
Gross Power - SAE J1995 165HP
Bore 4.75in
Stroke 6in
Displacement 640.75in³
Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 inHg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (1) Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard.
Note (3) Engine derate will commence at an altitude of 4500 m (14,763.7 ft).

Operating Specifications

Nominal Payload Capacity 14991lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 45360lb
Static Tipping Load - Full Turn - Lift Arms Horizontal 39397lb
Breakout Force - SAE 26504lb
Gross Machine Mass 65482lb

Weights

Empty 45691lb
Loaded 60682lb
Loaded - Rear Axle 19577lb
Loaded - Front Axle 41105lb
Empty - Front Axle 16810lb
Empty - Rear Axle 28881lb

Hydraulic Cycle Times

Raise 5s
Dump 2s
Total Cycle Time 9.3s
Lower, Empty, Float Down 2.3s

Turning Dimensions

Outside Clearance Radius 225.1in
Inner Clearance Radius 111.2in
Articulation Angle 42.5°
Axle Oscillation 10°

Transmission

Forward - 1 2.8mile/h
Forward - 2 4.8mile/h
Forward - 3 9.3mile/h
Forward - 4 16.3mile/h
Reverse - 1 2.8mile/h
Reverse - 2 4.8mile/h
Reverse - 3 9.2mile/h
Reverse - 4 14.3mile/h

Tires

Tire Size 17.5 × R25 VSMS

Standards

Standards ROPS/FOPS Certified Cab

Bucket Capacities

Dump Bucket - 4 4.4yd³
Ejector Bucket 3.1yd³
Dump Bucket - 2 3.7yd³
Dump Bucket - 1 3.2yd³
Dump Bucket - 3 - Standard Bucket 4.1yd³
Bucket Capacities 2.5-3.4 m³ (3.2-4.4 yd³)

Service Refill Capacities

Rear Differential and Final Drives 11.1gal (US)
Transmission 11.9gal (US)
Front Differential and Final Drives 10gal (US)
Engine Crankcase - With Filter 6.6gal (US)
Fuel Tank 77.9gal (US)
Cooling System 17.7gal (US)
Hydraulic Tank 23.2gal (US)

Standard Equipment

  • Electrical
    • Alternator, 75-amp
    • Auxiliary Start Receptacle
    • Battery Disconnect Switch, Ground Level
    • Circuit Breaker, 80-amp
    • Corrosive Protection Spray
    • Diagnostic Connector
    • Electric Starting, 24-volt
    • Engine Shutdown Switch
    • External Lighting System, Front, Rear, Halogen Work Lights
    • Low Maintenance Batteries
    • Reversing Alarm
    • Starting and Charging System
  • Operator Environment
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric Horns
    • Gauges
      – Engine Coolant Temperature
      – Fuel Level
      – Hydraulic Oil Temperature
      – Speedometer
      – Tachometer
      – Transmission Temperature
    • Indicator Lights
      – Alert Warning Light
      – Residual Brake Pressure
    • Pilot Hydraulic Implement Controls, Single Joystick
    • Open Operator Station ROPS/FOPS Structure with Removable Canopy Structure
    • STIC Steering
    • Suspension Tee Seat with Retractable Seat Belt
  • Power Train
    • Cat 3306B DITA Diesel Engine, 6-Cylinder
    • Crossflow Radiator
    • Duo-Cone Seal Guards
    • Engine Air Intake Precleaner
    • Fuel Priming Aid
    • Full Hydraulic Enclosed Wet Disc Brakes (SAFR)
    • Heat Shields
    • Manual Fuel Shut Off Tap
    • Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse
    • Rims, 5-piece, Tubeless
    • Torque Converter
    • Transmission Neutralizer
    • Transmission Filter Drain Tap
  • Other Standard Equipment
    • Brake Light
    • Bucket, Dump
    • Bucket Lip
    • Catalytic Exhaust Purifier/Muffler Group
    • Cap, Radiator Manual Release
    • Decals, International Picto Graphics
    • Engine and Transmission Belly Guards
    • Fenders, Front, Rear
    • Firewall
    • Handholds
    • Hydraulic Oil Cooler, Swing Out
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • Protection Wear Bars 100 × 50 mm (4 × 2 in)
    • Radiator Grill, Swing Out
    • Semi Centralized Lubrication Points
    • S·O·S port
      – Coolant
      – Engine Oil
      – Hydraulic Oil
      – Transmission Oil
    • Swing Out Radiator Grill
    • Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional Equipment

  • Optional Equipment
    • After-Treatment Options
      – DPF (Flow Through)
    • Brake Release Arrangements, Includes Steering Release
      – Recovery Hook
      – Recovery Bar
    • Brake Pressure Gauges
    • Buckets
      – Cutting Edge, Bolt-On
      – Cutting Edge, Cat Weld On
      – Cutting Edge, Half Arrow, Flat
      – Ejector Bucket Installed
      – Heel Shrouds, Ejector and Dump Buckets
      – Lip Fully Welded or Tack Welded
      – Mechanically Attached Wear Plate System (MAWPS)
      – Various Sizes, Dump (2.5 m³/3.2 yd³ to 3.4 m³/4.4 yd³), Ejector (2.4 m³/3.1 yd³)
      – Standard Lip or Bolt-On Lip
      – Wear Bars, Ejector and Dump Buckets
      – Wear Liner (2.8 m³/3.1 yd³ and 3.1 m³/4.1 yd³ Dump Bucket)
    • Chain Ready Front Fenders (requires chain ready rims, chains not included)
    • Covers
      – Antivandalism for Shipping
      – Guard, Light
      – Rear Grill (Additional Bolt-On Guard)
    • Draw Bar Attachment, Bolt-On
    • Fast Fill System
      – Coolant
      – Engine Oil
      – Fuel
      – Hydraulic Oil
      – Transmission Oil
    • Fire Suppression System
      – Ansul, Powder Based
    • Fluids
      – Arctic Fuel
      – Arctic Coolant
    • Front Light Protectors
    • Hydraulic System
      – Ejector Bucket Ready
      – Alternate Implement/Pilot Control Configuration
      – Alternate Oil Level Gauge
    • Lifting Group, Mine Transfer
    • Lubrication System
      – Automatic
      – Centralized
    • Operators Station ROPS/FOPS Enclosed
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement
      – Push to Apply
      – Pull to Apply
    • Payload Control System (PCS)
    • Reflective Tape (Yellow/Green)
    • Remote Control Interface (excludes Transmitter and Receiver), Includes Warning Lights (Green)
      – Cattron
      – RCT
    • Radiator, High Ambient
    • Reversible Steering
    • Ride Control System
    • Rim
      – Tube Type
      – Tube or Tubeless (chain ready)
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
    • Seat Covers, Tee and Standard
    • Secondary Steering System
    • Service Tools
      – Recovery Bar (for use with Brake Release, Recovery Bar System)
      – Reference Parts Manual for Additional Tooling Available
    • Switches
      – Idle Timer
      – Lift Arm Positioner
      – Transmission Neutralizer Override Switch
      – Transmission Pressure ABA Park Brake Engagement
    • Tire Arrangements
      – Tire, 17.5 × R25 VSMS L5S Bridgestone
      – Tire, 17.5 × 25, VSDL Bridgestone
    • Wear Protection Bars/Plates
      – Cab/ROPS
      – Hydraulic Tank
      – Radiator
      – Articulation