+
The Cat® 236D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
Gross Power - SAE J1995 | 74.3hp |
Net Power - SAE 1349 | 73.2hp |
Displacement | 203in³ |
Stroke | 4.7in |
Bore | 3.7in |
Engine Model | Cat C2.2 |
Net Flywheel Power | 73.2hp |
Peak Torque - 1,500 rpm - SAE J1995 | 195ft·lbf |
Net Power - ISO 9249 | 73.9hp |
Rated Operating Capacity | 1800lb |
Tipping Load | 3600lb |
Breakout Force - Tilt Cylinder | 5003lb |
Rated Operating Capacity with Optional Counterweight | 2000lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Operating Weight | 6567lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Wheel Base | 43.5in |
Height - Top of Cab | 82in |
Vehicle Width over Tires | 66in |
Ground Clearance | 7.7in |
Departure Angle | 26° |
Maximum Dump Angle | 48° |
Maximum Reach - With Arms Parallel to Ground | 53.3in |
Turning Radius from Center - Machine Rear | 64.5in |
Bucket Pin Height - Maximum Lift | 122.9in |
Length - Without Bucket | 108.9in |
Rack Back Angle - Maximum Height | 91° |
Turning Radius from Center - Bucket | 83in |
Turning Radius from Center - Coupler | 51.8in |
Clearance at Maximum Lift and Dump | 92.9in |
Reach - Maximum Lift/Dump | 16in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte |
Bumper Overhang - Behind Rear Axle | 40.2in |
Maximum Overall Height | 156.6in |
Length - With Bucket on Ground | 137.3in |
Bucket Pin Height - Carry Position | 7.5in |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
Chain Box - Each Side | 2.3gal (US) |
Cooling System | 3.7gal (US) |
Engine Crankcase | 3gal (US) |
Fuel Tank | 24.8gal (US) |
Hydraulic System | 13.2gal (US) |
Hydraulic Tank | 10.3gal (US) |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 20gal/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3335psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39hp |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335psi |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 30gal/min |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58hp |
Travel Speed - Forward or Reverse - Two Speed Option | 10.6mile/h |
Travel Speed - Forward or Reverse - One Speed | 7mile/h |
Outside Cab** | 101 dB(A) |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Electrical |
|
Operator Environment |
|
Power Train |
|
Other |
|
Mandatory Equipment |
|
Optional Equipment |
|