+
Gross Power - SAE J1995 | 67.1hp |
Net Power - SAE 1349 | 65.8hp |
Displacement | 134.3in³ |
Stroke | 3.9in |
Bore | 3.3in |
Peak Torque - 1,500 rpm - SAE J1995 | 153ft·lbf |
Net Flywheel Power | 65.8hp |
Net Power - ISO 9249 | 66.5hp |
Engine Model | Cat C2.2 CRDI |
Rated Operating Capacity | 1900lb |
Tipping Load | 3800lb |
Breakout Force - Tilt Cylinder | 3928lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, |
Rated Operating Capacity with Optional Counterweight | 2000lb |
Operating Weight | 6514lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, |
Wheel Base | 41.5in |
Height - Top of Cab | 79.9in |
Vehicle Width over Tires | 58.9in |
Ground Clearance | 6.7in |
Departure Angle | 27.9° |
Maximum Dump Angle | 47.4° |
Length - Without Bucket | 99.3in |
Clearance at Maximum Lift and Dump | 88.7in |
Bucket Pin Reach - Maximum Lift | 8.8in |
Maximum Overall Height | 150.9in |
Turning Radius from Center - Machine Rear | 59.6in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, |
Bucket Pin Height - Carry Position | 8.4in |
Length - With Bucket on Ground | 127.3in |
Bumper Overhang - Behind Rear Axle | 35.2in |
Turning Radius from Center - Bucket | 77.8in |
Maximum Reach - With Arms Parallel to Ground | 49.2in |
Bucket Pin Height - Maximum Lift | 118.1in |
Reach - Maximum Lift/Dump | 25.7in |
Rack Back Angle - Maximum Height | 88.2° |
Turning Radius from Center - Coupler | 43.4in |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
Cooling System | 3.2gal (US) |
Engine Crankcase | 2.6gal (US) |
Fuel Tank | 15.1gal (US) |
Hydraulic System | 11.9gal (US) |
Hydraulic Tank | 9gal (US) |
Chain Box - Each Side | 1.8gal (US) |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26gal/min |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 35.5hp |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336psi |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 18gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336psi |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9hp |
Travel Speed - Forward or Reverse - One Speed | 7.6mile/h |
Travel Speed - Forward or Reverse - Two Speed Option | 11.1mile/h |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Inside Cab* | 83 dB(A) |
Outside Cab** | 101 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Electrical |
|
Operator Environment |
|
Power Train |
|
Other |
|
Mandatory Equipment |
|
Optional Equipment |
|