 
		          | Gross Power - SAE J1995:2014 | 67.1hp | 
| Net Power - SAE 1349 | 65.8hp | 
| Displacement | 134.3in³ | 
| Stroke | 3.9in | 
| Bore | 3.3in | 
| Engine Model | Cat C2.2 CRDI | 
| Peak Torque - 1,500 rpm - SAE J1995 | 153ft·lbf | 
| Net Power - ISO 9249 | 66.5hp | 
| Rated Operating Capacity | 1550lb | 
| Rated Operating Capacity with Optional Counterweight | 1650lb | 
| Tipping Load | 3100lb | 
| Breakout Force - Tilt Cylinder | 3927lb | 
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | 
| Operating Weight | 5849lb | 
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | 
| Wheel Base | 41.5in | 
| Length - With Bucket on Ground | 127.3in | 
| Length - Without Bucket | 99.4in | 
| Height - Top of Cab | 79.8in | 
| Vehicle Width over Tires | 58.9in | 
| Maximum Overall Height | 143.8in | 
| Bucket Pin Height - Maximum Lift | 110.9in | 
| Bucket Pin Height - Carry Position | 8.5in | 
| Reach - Maximum Lift/Dump | 21in | 
| Clearance at Maximum Lift and Dump | 81.8in | 
| Ground Clearance | 6.9in | 
| Departure Angle | 27.9° | 
| Maximum Dump Angle | 46.7° | 
| Rack Back Angle - Maximum Height | 88.9° | 
| Maximum Reach - With Arms Parallel to Ground | 50.7in | 
| Turning Radius from Center - Machine Rear | 59.6in | 
| Turning Radius from Center - Coupler | 43.5in | 
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery | 
| Bumper Overhang - Behind Rear Axle | 35.2in | 
| Turning Radius from Center - Bucket | 77.8in | 
| ROPS | ISO 3471:2008 | 
| FOPS | ISO 3449:2005 Level I | 
| Chain Box - Each Side | 1.8gal (US) | 
| Cooling System | 3.2gal (US) | 
| Engine Crankcase | 2.6gal (US) | 
| Fuel Tank | 15.1gal (US) | 
| Hydraulic System | 11.9gal (US) | 
| Hydraulic Tank | 9gal (US) | 
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336psi | 
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336psi | 
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33.5hp | 
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9hp | 
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 18gpm | 
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26gpm | 
| Travel Speed - Forward or Reverse - One Speed | 7.6mile/h | 
| Travel Speed - Forward or Reverse - Two Speed Option | 11.1mile/h | 
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. | 
| Outside Cab*** | 102dB(A) | 
| Inside Cab** | 83dB(A) | 
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. | 
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | 
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe | 
| Electrical | 
 | 
| Operator Environment | 
 | 
| Power Train | 
 | 
| Other | 
 | 
| Mandatory Equipment | 
 | 
| Optional Equipment | 
 |