| Net Power | 69.5hp |
| Engine Model | Cat C3.3B |
| Displacement | 203in³ |
| Bore | 3.7in |
| Gross Power - SAE J1995:2014 | 74.3hp |
| Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 | 69.5hp |
| Stroke | 4.7in |
| Operating Weight | 21091lb |
| Maximum Operating Weight with Cab** | 21091lb |
| Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. |
| Minimum Operating Weight with Cab* | 19735lb |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. |
| Dig Depth | 182.8in |
| Boom In Reach | 126.6in |
| O/A Undercarriage Length | 126in |
| O/A Track Width | 97.2in |
| Stick Length | 92.8in |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Maximum Blade Height | 16.1in |
| Note (1) | **Boom Height when stick is pinned in working position with attachments Standard Stick offers only one pin position. |
| Overall Shipping Length - with Counterweight | 7052 mm (277.6 in)*** |
| Overall Shipping Length - without Counterweight | 7052 mm (277.6 in)*** |
| Maximum Reach | 300.7in |
| Cab Height | 100in |
| Ground Clearance | 14in |
| Boom Swing - Left | 23.8in |
| Maximum Dump Clearance | 199.7in |
| Vertical Wall | 134in |
| Maximum Blade Depth | 26in |
| Maximum Dig Height | 277.1in |
| Tail Swing with Counterweight | 62.4in |
| Swing Bearing - Height | 29.7in |
| Track Belt/Shoe Width | 17.7in |
| Boom Swing - Right | 36.8in |
| Tail Swing without Counterweight | 57.1in |
| Maximum Reach - Ground Level | 293.7in |
| Height - Boom Transport - No Tools* | 89in |
| Height - Boom Working - With Tools** | 120.1in |
| Height | 17in |
| Width - Wide | 104in |
| Width - Standard | 97in |
| Recyclability | 96% |
| Boom Swing - Right | 36.8in |
| Cab Height | 100in |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Note (1) | **Boom Height when stick is pinned in working position with attachments Standard Stick offers only one pin position. |
| Maximum Reach | 281.1in |
| Boom In Reach | 120.4in |
| Maximum Dump Clearance | 187.4in |
| Tail Swing without Counterweight | 57.1in |
| Maximum Reach - Ground Level | 273.6in |
| O/A Undercarriage Length | 126in |
| Swing Bearing - Height | 29.7in |
| Maximum Dig Height | 265.2in |
| Track Belt/Shoe Width | 17.7in |
| O/A Track Width | 97.2in |
| Ground Clearance | 14in |
| Tail Swing with Counterweight | 62.4in |
| Vertical Wall | 117.8in |
| Dig Depth | 161.7in |
| Stick Length | 71.8in |
| Boom Swing - Left | 23.8in |
| Maximum Blade Height | 16.1in |
| Maximum Blade Depth | 26in |
| Overall Shipping Length - without Counterweight | 266.7in |
| Overall Shipping Length - with Counterweight | 266.7in |
| Height - Boom Transport - No Tools* | 95.7in |
| Height - Boom Working - With Tools** | 104.7in |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Operating Pressure - Swing | 3626psi |
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Digging Force - Stick - Standard | 9500lb |
| Digging Force - Stick - Long | 8023lb |
| Operating Pressure - Travel | 4134psi |
| Maximum Auxiliary Circuit - High Flow - Pressure at Pump | 4134lbf/in |
| Maximum Auxiliary Circuit - High Flow - Flow at Pump | 37gpm |
| Pump Flow at 2,400 rpm | 62gpm |
| Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9gpm |
| Digging Force - Bucket | 13943lb |
| Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134psi |
| Maximum Auxiliary Circuit - Primary - Flow at Pump | 35gpm |
| Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134psi |
| Operating Pressure - Equipment | 4134psi |
| Gradeability - Maximum | 30 degrees |
| Ground Pressure - Minimum Weight | 5psi |
| Travel Speed - High | 3.1mile/h |
| Travel Speed - Low | 1.6mile/h |
| Ground Pressure - Maximum Weight | 5.4psi |
| Maximum Traction Force - High Speed | 6497lb |
| Maximum Traction Force - Low Speed | 19064lb |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Top Guard | ISO 10262:1998 (Level I) |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Engine Oil | 3gal (US) |
| Fuel Tank | 39gal (US) |
| Hydraulic System | 29gal (US) |
| Cooling System | 2.6gal (US) |
| Hydraulic Tank | 14gal (US) |
| Note | European Union Directive "2000/14/EC" |
| Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 99dB(A) |
| Steel Tracks with Pads | 728lb |
| Long Stick | 146lb |
| Counterweight | 552lb |
| Machine Swing Speed | 10.6r/min |
| Boom Swing - Right | 50 degrees |
| Boom Swing - Left | 60 degrees |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
| Note | The 309 CR specifications are based on a machine configured with a Long (L) Undercarriage. |
| Engine |
|
| Hydraulics |
|
| Operator Environment |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Other |
|
| Operator Environment |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Guarding |
|
| Other |
|