865-546-1414
contact us
Home New Dozers D3 Track-Type Tractor

D3 Track-Type Tractor

Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer Cat® D3 Small Dozer

The Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Available to rent

Key Specs

  • Engine Model Cat® C3.6
  • Power - Net 104 hp
  • Operating Weight 20639.68 lb
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer
  • Cat® D3 Small Dozer

Benefits

Easy to Operate

GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.

Up to 10%

Lower Total Ownership Cost

with improved fuel economy, long undercarriage life and easy maintenance.

Up to 15%

More Performance

with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.

Engine

Engine Model Cat® C3.6
Power - Net 104hp
Displacement 220in³
Net Power - 2,200 rpm - SAE J1349 104hp
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104hp
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights

Operating Weight 20639.68lb
Operating Weight 20640lb
Operating Weight - LGP 21369lb
Operating Weight - LGP, 762 mm/30 in 21810lb
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Transmission

Drive Pumps 1
Maximum Travel Speed - Forward 5.6mile/h
Maximum Travel Speed - Reverse 6.2mile/h
Track Motors 2
Relief Valve Settings 7033psi

Hydraulic Controls

Pump Output 17.2gpm
Relief Valve Settings 2988psi

Ripper

Type Parallelogram
Number of Shanks 3
Height 6.5in
Weight 1222lb
Maximum Digging Depth 13.3in
Maximum Reach - Ground Line 30.2in
Overall Width 67.3in
Maximum Ground Clearance Under Tip 17.6in

Undercarriage

Ground Pressure - LGP, 762 mm (30 in) 3.9psi
Length - Track on Ground - LGP, 762 mm (30 in) 91in
Shoe Width - LGP 26in
Shoe Width - LGP, 762 mm (30 in) 30in
Track Gauge 63in
Number of Rollers - Each Side 7
Track Gauge - LGP, 762 mm (30 in) 73in
Shoe Width - Standard 20in
Ground Pressure - LGP 4.5psi
Track Gauge - LGP 69in
Length - Track on Ground - LGP 91in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40

Undercarriage 

Ground Pressure  5.7psi
Length of Track on Ground  91in
Number of Shoes - Each Side - Abrasion Undercarriage  36

Service Refill Capacities

Cooling System 5gal (US)
Final Drive - Each - LGP 2.6gal (US)
Crankcase - With Filter 2.8gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9gal (US)
Transmission - Hydraulic Tank 23.8gal (US)
Fuel Tank 51.5gal (US)

Service Refill Capacities 

Final Drives - Each Side  2.6gal (US)

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 14

Dimensions

BLADE: Blade Width - LGP 126.7in
Track Gauge - LGP, 762 mm (30 in) 73in
BLADE: Digging Depth - LGP 23.2in
Track Gauge - LGP 67.9in
BLADE: Blade Capacity (SAE) - LGP 3.06yd³
BLADE: Blade Width at Maximum Angle - LGP 115.8in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
Ground Clearance - LGP, 762 mm (30 in) 13in
BLADE: Blade Height - LGP 39.8in
BLADE: Blade Lift Height - LGP 30.2in
Ground Clearance - LGP 13in
Overall Length - With Blade - LGP, 762 mm (30 in) 169.6in
Overall Length - With Blade - LGP 169.6in
BLADE: Maximum Tilt - LGP 17.7in
BLADE: Maximum Angle (either side) - LGP 25°
Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - Standard 128.7in
Dozer Height - Standard 109in
Width of Dozer (standard shoes, no blade) - LGP 94.9in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5in
Length of Basic Dozer (without blade) - LGP 128.7in
Dozer Height - LGP, 762 mm (30 in) 109in
Width of Dozer (standard shoes, no blade) - Standard 83in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7in
Dozer Height - LGP 109in

Dimensions 

BLADE: Blade Capacity (SAE) - Standard  2.86yd³
Track Gauge - Standard  63in
BLADE: Digging Depth - Standard  23.8in
BLADE: Blade Lift Height - Standard  30.2in
Ground Clearance - Standard  13in
Overall Length - With Blade - Standard  170.7in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
BLADE: Blade Height - Standard  42.2in
BLADE: Maximum Tilt - Standard  15.8in
Note  Abrasion Undercarriage
BLADE: Blade Width - Standard  109.5in
BLADE: Blade Width at Maximum Angle - Standard  103.8in
BLADE: Maximum Angle (either side) - Standard  25°

Engine 

Power Train  Hydrostatic

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II

Retrieval Winch

Maximum Line Pull - Bare Drum 32150lb
Control Hydraulic
Rope Diameter - Optional 0.75in
Drum Capacity - Optional Cable 195ft
Maximum Line Speed - Full Drum 79ft/min
Drum Capacity - Recommended Cable 277ft
Winch Drive Hydraulic
Weight 1747lb
Maximum Line Pull - Full Drum 20350lb
Rope Diameter - Recommended 0.63in
Maximum Line Speed - Bare Drum 50ft/min
Speed Variable
Winch Length 35.63in
Drum Diameter 8in
Overall width 27.91in
Drum Width 9.65in
Throat Clearance 5.6in

High Performance Winch

Winch length 27.76in
Rope diameter – optional 0.75in
Maximum line speed – bare drum 131ft/min
Maximum line pull – bare drum 40000lb
Weight 1345lb
Drum capacity – optional 256ft
Maximum line speed – full drum 207ft/min
Rope diameter – recommended 0.63in
Winch drive Hydrostatic
Throat clearance 6.75in
Drum diameter 10in
Overall width 29.2in
Drum width 10.8in
Maximum line pull – full drum 25000lb
Speed Variable
Drum capacity – recommended cable 371ft
Control Hydraulic

IMPROVED VISIBILITY

  • The sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

ENHANCED TECHNOLOGY

  • Steer Assist automates track steering with light or heavy loads and automates blade tilt steering to help push heavy loads with less effort. This feature helps reduce operator inputs by up to 75% and enhances operator efficiency and productivity. Steer Assist is standard with Assist with Attachment Ready Option (ARO). Steer Assist 3D is standard with Grade 3D with Assist.
  • Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements. Stable Blade Lift and Tilt is standard with Assist with ARO and Grade 3D with Assist.
  • Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available. Blade Load Monitor is standard with Assist with ARO and Grade 3D with Assist.
  • Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed. Traction Control is standard with Assist with ARO and Grade 3D with Assist.
  • AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available. AutoCarry is standard with Assist with ARO and Grade 3D with Assist.
  • Scalable Grade 2D and 3D with Assist is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
  • Cat Command remote control is an optional feature that takes you off the machine and away from hazardous conditions, dust, noise or vibration or operating on unstable surfaces. Eliminates risk of injury from climbing on or off the machine. Integrated with dozer systems, Cat Command enables smooth, precise control with access to all machine functions and advanced features (if equipped) for maximum efficiency and productivity. Availability varies by region.

UP TO 10% IMPROVED FUEL ECONOMY

  • The D3 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

COMFORTABLE WORK SPACE

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

  • The D3 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.

SUSTAINABILITY

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Tier 5 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Cat® Grade with Slope Assist™ helps you avoid costly rework and wasteful fuel burn and greenhouse gas emissions by automating your blade position without a GPS signal.
  • Cat® Grade with 3D automates blade movements using a GPS signal helping you follow a grade design, reducing fuel burn and greenhouse gas emissions by improving efficiency and accuracy.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

Standard Equipment

  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • Heavy Duty (HD) Undercarriage (40 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Slope Indicate
    • Stable Blade – Basic Lift
    • Third party 3D grade system compatible
    • Cat Product Link™ PLE643/PLE743 Cellular
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Optional Equipment

  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion Undercarriage (36 section)
    • Track Pairs
      – Track, 510 mm (20 in)
      – Track, 660 mm (26 in)
      – Track, 762 mm (30 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Assist with Attachment Ready Option (ARO) includes:
      – Slope Indicate
      – Blade Load Monitor
      – Stable Blade Lift and Tilt
      – Slope Assist
      – Traction Control
      – Steer Assist
      – AutoCarry
    • Grade 3D with Assist includes:
      – Same Assist with ARO features
      – Steer Assist 3D
      – Grade 3D
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 254 mm (10 in) touchscreen grade display
    • Cat Command Console (availability varies by region)
    • Cat Command Station (availability varies by region)
  • Operator Environment
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Similar Products

Cat® D1 Small Dozer
D1 Dozer
  • Engine Model
    Cat C3.6
  • Power - Net
    80 hp
  • Operating Weight
    17855 lb
  • Operating Weight - LGP
    18839 lb
View Details
Cat® D2 Small Dozer
D2 Dozer
  • Engine Model
    Cat® C3.6
  • Power - Net
    92 hp
  • Operating Weight
    18382 lb
  • Operating Weight
    18382 lb
View Details
D4 Dozer
D4 Dozer
  • Engine Model
    Cat C4.4
  • Operating Weight
    29259 lb
  • Net Power - ISO 9249
    130 hp
  • Net Power - ISO 9249 (DIN)
    132 mhp
View Details