The Cat ® D11 Dozer delivers higher productivity at lower cost — for a reduction of up to 6% in overall cost per bank cubic meter compared to the previous model. Infused with performance-enhancing features, the D11 helps you improve the efficiency of your dozing operation. The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption. High-horsepower reverse speeds up non-productive traveling to reduce cycle time, while load-sensing hydraulics deliver more power to the dozer, increasing responsiveness and boosting fuel efficiency. Advanced technologies are completely integrated into the dozer, creating smart machines and more informed operators to maximize the productivity of your operation.
| Engine Model | Cat® C32 |
| Engine Power - Net SAE J1349/ISO 9249 - Forward | 850hp |
| Displacement | 1959in³ |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | 955hp |
| Note (1) | *Excludes all fan losses. |
| Note (2) | Engine ratings apply at 1,800 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
| Operating Weight | 235507lb |
| Operating Weight - Carrydozer | 250665lb |
| Note (1) | D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
| Note (2) | D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. |
| Semi-Universal (SU)* Capacity | 35.6yd³ |
| Semi-Universal (SU)* Width Over Endbits | 219.8in |
| U-Blade Capacity | 45yd³ |
| U-Blade Width | 249.6in |
| Reclamation Universal - Blade capacity (SAE J1265) | 55yd³ |
| Reclamation Universal - Width with blade (over end bits) | 251.8in |
| Carry Dozer - Blade capacity (SAE J1265) | 57yd³ |
| Carry Dozer - Width with blade (over end bits) | 263.9in |
| Engine Model | Cat® C32 |
| Displacement | 1959in³ |
| Engine Power - Net SAE J1349/ISO 9249 - Forward | 850hp |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | 957hp |
| Note (1) | *Excludes all fan losses. |
| Note (2) | Engine ratings apply at 1,800 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
| Fuel Tank - Total Volume | 500gal (US) |
| Fuel Tank - Usable Volume | 475gal (US) |
| Pump Type | Variable displacement piston pump |
| Combined Pump Output - Implement | 177gal/min |
| Shoe Type | Extreme Service |
| Width - Shoe | 28in |
| Width - Shoe - CD | 36in |
| Shoes/Side | 41 |
| Grouser Height | 4in |
| Pitch | 12.5in |
| Ground Clearance* | 30.6in |
| Track Gauge | 114in |
| Length - Track on Ground | 175in |
| Ground Contact Area | 9781in² |
| Ground Contact Area - CD | 12605in² |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
| 1.0 Forward | 2.5mile/h |
| 2.0 Forward | 4.4mile/h |
| 3.0 Forward | 7.6mile/h |
| 1.0 Reverse | 3mile/h |
| 2.0 Reverse | 5.3mile/h |
| 3.0 Reverse | 9.1mile/h |
| Drawbar Pull - 3 Forward | 46250ft·lbf |
| Drawbar Pull - 1 Forward | 148200ft·lbf |
| Drawbar Pull - 2 Forward | 82300ft·lbf |
| Maximum penetration force * (shank vertical) | 66000lb |
| Maximum penetration depth (standard tip) | 63.5in |
| Pryout Force | 148510lb |
| Maximum penetration force * (shank vertical) | 66110lb |
| Maximum penetration depth (standard tip) | 85.5in |
| Pryout Force | 148510lb |
| Overall Beam Width | 131.1in |
| Maximum Penetration Force - Shank Vertical | 77350lb |
| Maximum Penetration - Standard Tip | 43.3in |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | 145640lb |
| Width at Outside of Track (710 mm Track Shoe) | 149.8in |
| Length with SU-Blade** - No rear attachment | 345.1in |
| Overall Length SU-Blade and SS Ripper** | 421.7in |
| Cooling System | 46.8gal (US) |
| Cooling System Refill - Tier 2 Equivalent Engine | 41.7gal (US) |
| Engine Crankcase | 35.1gal (US) |
| Power Train | 120gal (US) |
| Power Train - Refill Volume | 103.3gal (US) |
| Final Drive - Each | 12.4gal (US) |
| Roller Frames - Each | 24.8gal (US) |
| Hydraulic Tank | 42.2gal (US) |
| Hydraulic System Tank and Chassis | 64.7gal (US) |
| Hydraulic System Chassis + Blade and Ripper (Standard) | 117.6gal (US) |
| Hydraulic System Chassis + Blade and Ripper (Carrydozer) | 143.4gal (US) |
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 |
| FOPS | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II |
| Sound (1) | The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). |
| Sound (2) | The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). |
| Ground Clearance* | 31.4in |
| Track Gauge | 114in |
| Width at Outside of Track (710 mm Track Shoe) | 142in |
| Height (ROPS/canopy)* | 185.9in |
| Length of Track on Ground | 175in |
| Length with SU-Blade** - No rear attachment | 337.8in |
| Overall Length SU-Blade and SS Ripper** | 414.4in |
| Note | *Includes grouser height for total dimensions on hard surfaces. |
| Note (1) | The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) |
| Operator Environment |
|
| Cat Technology Products |
|
| Cat Power Train |
|
| Undercarriage |
|
| Hydraulics |
|
| Electrical |
|
| Service And Maintenance |
|
| Operator Environment |
|
| Cat Technology Products |
|
| Cat Power Train |
|
| Undercarriage |
|
| Hydraulics |
|
| Electrical |
|
| Service And Maintenance |
|
| Rear Attachments |
|
| Blades |
|
| Other |
|
Print
Email
your location
call us
contact us