Maximize productivity in mining applications with the Cat® 844 Wheel Dozer, designed with efficiency in mind. Enhanced maintenance capabilities and simplified serviceability make for a long lifecycle, low owning and operating costs, and more uptime. Move more material with a machine built for the toughest conditions.
| Engine Model | Cat® C27 |
| Net Power - SAE J1349:2011 - Standard Ambient | 732hp |
| Rated Speed | 1800r/min |
| Emissions | Option 1 - U.S. EPA Tier 4 Final / EU Stage V |
| Engine Power - ISO 14396:2002 | 786hp |
| Gross Power - SAE J1995:2014 | 801hp |
| Net Power - SAE J1349:2011 - High Ambient | 681hp |
| Emissions | Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2 |
| Engine Power - ISO 14396: 2002 | 752hp |
| Gross Power - SAE J1995:2014 | 766hp |
| Net Power - SAE J1349:2011 - Standard Ambient | 699hp |
| Net Power - SAE J1349:2011 - High Ambient | 648hp |
| Bore | 5.4in |
| Stroke | 6in |
| Displacement | 1649.5in³ |
| Peak Torque - Speed | 2624lb/ft |
| Torque Rise | 18% |
| Note | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. |
| Operating Weight | 165089lb |
| Blade Capacity Range | 20.8yd³ |
| Transmission Type | Cat Planetary Power Shift |
| Converter Drive - Forward 1 | 4.5mile/h |
| Converter Drive - Forward 2 | 8.3mile/h |
| Converter Drive - Forward 3 | 14.2mile/h |
| Converter Drive - Reverse 1 | 4.9mile/h |
| Converter Drive - Reverse 2 | 9.1mile/h |
| Converter Drive - Reverse 3 | 15.5mile/h |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 8.5mile/h |
| Direct Drive - Forward 3 | 15.2mile/h |
| Direct Drive - Reverse 1 | 5.4mile/h |
| Direct Drive - Reverse 2 | 9.6mile/h |
| Direct Drive - Reverse 3 | 16.4mile/h |
| Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
| Output at 2,000 rpm and 6900 kPa (1,000 psi) | 82gpm |
| Cylinders, Double Acting - Lift, Bore and Stroke | 133 mm × 1535 mm (5.25 in × 60.4 in) |
| Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 210 mm × 188 mm (8.25 in × 7.4 in) |
| Relief Valve Setting - Bulldozer (Large Pump) | 2700psi |
| Relief Valve Setting - Tilt Cylinders (Small Pump) | 2920psi |
| Steering System - Circuit | Pilot, load sensing |
| Steering System - Pump | Piston, variable displacement |
| Minimum Turning Radius - Over Blade | 34ft |
| Total Steering Angle | 35° |
| Maximum Flow | 94.3gpm |
| Relief Valve Setting | 4500psi |
| Fuel Tank - Standard | 286.6gal (US) |
| Cooling System | 54.9gal (US) |
| Crankcase | 20gal (US) |
| Transmission | 29.1gal (US) |
| Differential - Final Drives - Front | 71.6gal (US) |
| Differential - Final Drives - Rear | 68.9gal (US) |
| Hydraulic System - Implement and Hydraulic Fan | 68.9gal (US) |
| Hydraulic System - Steering and Braking | 34.9gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 8.5° |
| Brakes | Meets ISO 3540:2011 |
| Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 116dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008)* | 114dB(A) |
| Note (1) | *Sound suppression equipped |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 116dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008)* | 114dB(A) |
| Note (1) | *Sound suppression equipped |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| ROPS/FOPS | ISO 3471:2008 and ISO 3449:2005 Level II Standards |
| Height - Top of ROPS | 17.2ft |
| Height - Top of Exhaust Pipe | 16.6ft |
| Height - Top of Hood | 12.7ft |
| Ground Clearance | 2ft |
| Centerline of Front Axle to Hitch | 7.5ft |
| Centerline of Rear Axle to Edge of Bumper | 12.5ft |
| Wheel Base | 15.1ft |
| Length - With Blade on Ground | 36.5ft |
| Note |
|
| Electrical And Lighting |
|
| Powertrain |
|
| Operator Environment |
|
| Safety |
|
| Service |
|
| Cooling |
|
| Cold Weather |
|
| Efficiency |
|
| Tramming |
|
| Note |
|
| Electrical And Lighting |
|
| Powertrain |
|
| Operator Environment |
|
| Safety |
|
| Service |
|
| Blades |
|
| Cooling |
|
| Cold Weather |
|
| Tramming |
|
Print
Email
your location
call us
contact us