Cat landfill compactors are designed with durability built in, ensuring maximum availability through multiple lifecycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1978, the 826 has been an industry leader for over 45 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 826 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.
Gross Power - SAE J1995:2014 | 435hp |
Net Power - SAE J1349:2011 | 405hp |
Net Power - ISO 9249:2007 | 405hp |
Engine Power - ISO 14396:2002 | 426hp |
Engine Model | C15 Cat® |
Emissions | U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA |
Rated Speed | 1800 |
Torque Rise | 33% |
Bore | 5.4in |
Stroke | 6.7in |
Displacement | 927.6in³ |
High Idle Speed | 2300r/min |
Low Idle Speed | 800r/min |
Maximum Altitude – Without Derating (Tier 4 Final/Stage V) | 9298ft |
Maximum Altitude - Without Derating (Tier 3/Stage IIIA) | 9098ft |
Note | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
Operating Weight (Tier 4 Final/Stage V) | 90207lb |
Operating Weight (Tier 3/Stage IIIA equivalent) | 89186lb |
Maximum Operating Weight (Tier 4 Final/Stage V) | 92568lb |
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) | 91549lb |
Transmission Type | Planetary - Powershift - ECPC |
Direct Drive - Forward 1 | 4.2mile/h |
Direct Drive - Forward 2 | 7.5mile/h |
Direct Drive - Reverse 1 | 4.3mile/h |
Direct Drive - Reverse 2 | 8.6mile/h |
Pump Flow at 1800 rpm | 30.9gal/min |
Main Relief Pressure | 3771psi |
Maximum Supply Pressure | 3495psi |
Lift System | Double Acting Cylinder |
Bore | 4.7in |
Stroke | 42.1in |
Cooling System | 30.6gal (US) |
Engine Crankcase | 9gal (US) |
Transmission | 17.4gal (US) |
Fuel Tank | 206.6gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) | 8.5gal (US) |
Differential - Final Drives - Front | 26.4gal (US) |
Differential - Final Drives - Rear | 29.1gal (US) |
Hydraulic Tank Only | 35.4gal (US) |
Note | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H |
Front | Planetary - Fixed |
Rear | Planetary - Oscillating |
Oscillation Angle | ±5° |
Service Brakes | Multi Disc Wet (Enclosed) 2 WHL |
Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
Machine Sound Power Level (ISO 6395:2008)* | 110dB(A) |
Note (1) | * Sound suppression equipped |
Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
Machine Sound Power Level (ISO 6395:2008)* | 110dB(A) |
Note (1) | * Sound suppression equipped |
Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Steering System - Circuit | Pilot operated, load sensing |
Bore | 4.5in |
Stroke | 22.7in |
Steering System - Pump | Piston - Variable Displacement |
Maximum System Flow | 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) |
Steering Pressure Limited | 3481psi |
Vehicle Articulation Angle | 86° |
Height to Top of Air Conditioning Condenser | 14.99ft |
Height - Cab Roof | 13.75ft |
Height - Top of Beacon | 15.63ft |
Height - Top of Exhaust Pipe | 14.56ft |
Height - Top of Hood | 10.87ft |
Ground Clearance - Bumper | 3.15ft |
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard | 9.38ft |
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard | 10.16ft |
Hitch to Centerline of Front Axle | 6.07ft |
Wheel Base | 12.14ft |
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard | 28.59ft |
Ground Clearance | 2.11ft |
Width - Over Wheels | 12.47ft |
Turning Radius - Inside of Wheels | 9.18ft |
Width – Moldboard Length | 14.16ft |
Width - Over End Bits | 14.75ft |
Height with Cutting Edge and Screen | 6.23ft |
Maximum Depth of Cut | 1.5ft |
Maximum Lift above Ground | 4.19ft |
Capacity, Rated | 16.1yd³ |
Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 28.59ft |
Width – Moldboard Length | 14.66ft |
Width - Over End Bits | 14.83ft |
Height with Cutting Edge and Screen | 6.63ft |
Maximum Depth of Cut | 2.03ft |
Maximum Lift above Ground | 3.825ft |
Capacity, Rated | 20.9yd³ |
Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 29.54ft |
Width – Moldboard Length | 14.25ft |
Width - Over End Bits | 14.41ft |
Height with Cutting Edge and Screen | 6.62ft |
Maximum Depth of Cut | 2.03mm |
Maximum Lift above Ground | 3.79ft |
Capacity, Rated | 22.9yd³ |
Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 30.7ft |
Combination Tips (Weight Group) | 21125lb |
Plus Tips - Weight (Group) | 22002lb |
Paddle Tips - Weight (Group) | 20540lb |
Diamond Tips Weight (Group) | 23997lb |
Outside Diameter | 77.6in |
Outside Diameter - Diamond | 78.1in |
Drum Diameter | 63.4in |
Drum Width | 47.2in |
Feet Per Row | 6 |
Feet Per Wheel | 30 |
Replaceable | Weld On |
Width Over Drums | 3800mm |
Tip Height | 179mm |
Tip Height - Diamond | 7.25in |
Note |
|
Powertrain |
|
Electrical |
|
Operator Environment |
|
Guards |
|
Fluids |
|
Other Standard Equipment |
|
Technology Products |
|
Special Arrangements |
|
Blades |
|
Wheels And Cleaner Bars |
|
Note |
|
Operator Environment |
|
Guards |
|
Powertrain |
|
Special Arrangements |
|
Miscellaneous |
|
Wheels And Cleaner Bars |
|
Other Standard Equipment |
|