The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.
| Engine Model | Cat® C9.3 |
| Gross Power (SAE J1995) | 342hp |
| Net Power (SAE J1349) | 334hp |
| Engine Power (ISO 14396) | 338hp |
| Bore | 4.5in |
| Stroke | 45.2in |
| Displacement | 567.5in³ |
| Note (1) | Advertised power is tested at 1,700 rpm. |
| Note (2) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. |
| Note (5) | Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards. |
| Note (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| No Engine De-rating Below | 3000ft |
| Peak Engine Torque Gross (SAE J1995) | 1275lbf·ft |
| Peak Engine Torque Net (SAE J1349) | 1263lbf·ft |
| Peak Engine Torque Speed | 1200r/min |
| Rated Payload | 26.5ton (US) |
| Heaped (SAE 2:1) | 19.6yd³ |
| Struck | 14.4yd³ |
| Tailgate Heaped SAE 2:1 | 20.4yd³ |
| Tailgate Struck | 14.5yd³ |
| Air Conditioning | If equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO 2 equivalent of 1.716 metric tonnes (1.891 tons). |
| Forward - 1 | 5mile/h |
| Forward - 2 | 9.4mile/h |
| Forward - 3 | 14.4mile/h |
| Forward - 4 | 22.1mile/h |
| Forward - 5 | 30.7mile/h |
| Forward - 6 | 36.3mile/h |
| Reverse - 1 | 5.5mile/h |
| Note (1) | The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Front Axle - Empty | 30974lb |
| Center Axle - Empty | 10242lb |
| Rear Axle - Empty | 9757lb |
| Total - Empty | 50975lb |
| Front Axle - Rated Load | 5511lb |
| Center Axle - Rated Load | 23699lb |
| Rear Axle - Rated Load | 23699lb |
| Total - Rated Load | 52910lb |
| Front Axle - Loaded | 36484lb |
| Center Axle - Loaded | 33944lb |
| Rear Axle - Loaded | 33457lb |
| Total - Loaded | 103886lb |
| Type | High strength Brinell HB450 wear resistant steel |
| Front Plate | 0.28in |
| Base Plate | 0.51in |
| Side Plates | 0.43in |
| Scow | 0.51in |
| Fuel Tank | 91gal (US) |
| Cooling System | 18gal (US) |
| Steering/Hoist Hydraulic System | 24gal (US) |
| Engine Crankcase | 8gal (US) |
| Transmission | 10gal (US) |
| Output Transfer Gear Box | 5gal (US) |
| Final Drive - Each | 1.6gal (US) |
| DEF Tank | 4gal (US) |
| Raise Time | 10s |
| Lower Time | 8s |
| Brakes | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449 - 2005 Level II |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2019 |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
| Turning Dimensions - SAE Turning Radius | 294in |
| Turning Dimensions - Clearance Radius | 318in |
| Turning Dimensions - Inside Radius | 153in |
| Turning Dimensions - Aisle Width | 210in |
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Lock to Lock | 4.75 seconds @ 60 rpm |
| Hydraulic Excavators: 349/352 - Passes | 4-5 |
| Hydraulic Excavators: 336 - Passes | 5-6 |
| Wheel Loaders: 972/972 XE - Passes | 3-4 |
| Wheel Loaders: 966/966 XE - Passes | 4 |
| Wheel Loader: 962 - Passes | 4-5 |
| Wheel Loader: 950 - Passes | 5 |
| Note | An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr |
| Note |
|
| Operator Environment |
|
| Technology |
|
| Electrical And Lighting |
|
| Powertrain |
|
| Safety |
|
| Guards |
|
| Other Standard Equipment |
|
| Note |
|
| Operator Environment |
|
| Technology |
|
| Electrical And Lighting |
|
| Optional Equipment |
|