3516B Generator Set

Standard Equipment

• Air Inlet System

  Air cleaner; single element canister type

• Cooling

  Package mounted radiator

• Exhaust

  Exhaust flange outlet

• Fuel	Primary fuel filter with integral water separator Secondary fuel filters Fuel priming pump

• Generator

  IP23 Protection Matched to the performance and output characteristics of Cat engines

• Power Termination

  Busbar

• Control Panel

  Cat ECS Genset controller

• General

  Paint - Caterpillar yellow except rails and radiators gloss black

• Control Panels

  Speed adjust Text alarm/event descriptions Generator set packages include Caterpillar's voltage regulator Auto/start/stop control 24 Volt DC operation Cat ECS 100 Generator mounted - Rear facing Controls: Environmental sealed front face Engine cool-down timer Emergency stop pushbutton Limiter and exciter diode monitor Engine cycle crank Lamp test Alarm acknowledge Customizable screens PLC functionality Load histogram feature 0 True RMS AC metering, 3-phase, +/-2% accuracy Operating hours Digital indication for: DC volts RPM Coolant temperature Amps (per phase & average) Oil pressure (psi, kPa or bar) Volts (L-L & L-N) Frequency (Hz) Power factor (per phase & average) kW (per phase, average & percent) High coolant temperature Low oil pressure Warning/shutdown with common LED indication of shutdowns for01/10/2018: kVAr (per phase, average & percent) kVA (per phase, average & percent) kVAr (per phase, average & percent) Emergency stop Overspeed Failure to start (overcrank) Programmable protective relaying functions: Low coolant temperature Generator phase sequence Low coolant level 1 Programmable digital outputs Gear type lube oil pump Battery disconnect switch Caterpillar yellow with high gloss black rails and radiator NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) Medium voltage: Form wound - Permanent magnet excitation (PMG) - Winding temperature detectors - NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) - Busbar connections, right side extension box, bottom cable entry - NEMA standard hole pattern Fumes disposal Permanent magnet excitation (PMG) NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) Permanent magnet excitation (PMG) NEMA standard hole pattern Reverse reactive power (kVAr) (32RV) Over/under voltage (27/59) NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) Permanent magnet excitation (PMG) Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby) Permanent magnet excitation (PMG) SAE standard rotation Internal excitation (IE) Flexible fuel lines - shipped loose IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min / max exciter Busbar connections, right side extension box, bottom cable entry Medium voltage: Communications: NEMA standard hole pattern Lubricating oil Oil drain lines and valve 3 Phase brushless, Salient pole 24 Volt electric starting motor 6 Customer programmable digital inputs Dry exhaust manifold Accessory module data link ADEM A3 Form wound ATAAC - 3516E package radiators shipped installed Busbar connections, top center mounted, top cable entry High voltage: 4 Programmable relay outputs (Form A) Anti-condensation space heater NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) Controls: Speed adjust - Auto/start/stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy NEMA standard hole pattern 45 Amp Charging alternator 3 Analog inputs Random wound Anti-vibration mounts (shipped loose) Cat connect Oil filter, filler and dipstick Rails - Engine/generator/radiator mounting Customer data link (Modbus RTU) Flywheel and flywheel housing - SAE No. 00 English Busbar connections, right side extension box, bottom cable entry Serial annunciator module data link Integral lube oil cool Certified standard PGS provided Winding temperature detectors 1 Programmable relay outputs (Form C) Reverse power (kW) (32) Form wound - Permanent magnet excitation (PMG) Right hand servicing Overcurrent (50/51) 6 Lead Flanged faced outlet(s) Low voltage: Number of I/O varies on options selected Battery and battery rack w/cables Over/under frequency (81 o/u) Fuel cooler; not included with packages without radiator Busbar connections, right side extension box, bottom cable entry Rubber anti-vibration mounts - shipped loose NEMA standard hole pattern

Optional Equipment

• Control System

  EMCP 4.4

• Air Inlet System

  Single element filter Dual element air cleaner

• Exhaust

  Exhaust mufflers

-->

Generator

Permanent magnet excitation (PMG) Internal excitation (IE) Anti-condensation heater Oversize and premium generators

Cooling System

Water level switch gauges Standard ambient radiators Coolant Standard ambient ATAAC radiators Optional installed ATAAC radiators Air inlet protection including air shut off magnetic switch Optional installed radiator

Power Termination

Circuit breakers, IEC compliant Circuit breakers, UL listed

Control Panels

Generator temperature monitoring & protection Remote monitoring software Load share module Digital I/O module

Exhaust System

Exhaust Offset Flanges Elbows Y Adapters Flange and exhaust expanders Clean emission parets Mufflers Flexible fittings

Fuel System

Primary fuel filter

General

Special paint US aid emblem Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007 EEC Declaration of Conformity Integral & sub-base fuel tanks Enclosures: Sound attenuated, weather protective Integral & sub-base UL listed dual wall fuel tanks EU Certificate of Conformance (CE) The following options are based on regional and product configuration: Automatic transfer switches (ATS) UL 2200 package

Mounting

Rubber anti-vibration mounts Spring type vibration isolators IBC isolators

Generators And Attachments

Generator conversions - IE and PM 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 Frame 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, IE, No. of leads: 6, Picth: 0.6667 - 1600 Frame 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 and 1800 Frames Alternator air cleaner Space heater

Intrumentation

Pyrometer and thermocouples

Lube System

Prelube pump groups Oil lever regulator Lube oil

Starting/charging

Battery chargers Air starting motor with control and silencer Heavy duty starting system Oversize batteries Charging alternator

Crankcase Systems

Crankcase protection group: No explosion relief valves; Explosion relief valves Crankcase ventilation system

Mounting System

Spring type vibration isolators IBC vibration isolators Puck style low efficiency isolators

Power Connections

Neutral ground connections Center post busbarss Right, left side and rear power connections Grounding groups

Special Tests / Reports

Standard engine test charge IBC Certification Special package tests: PGS Test report @ 1.0 and 0.8 power factors Generator set test report CSA Certification Torsional vibration analysis TVA report Fuel consumption test

Starting / Charging Sytem

Jacket water heaters