R1300G Underground Mining Loader

Standard Equipment

• Electrical

  Alternator, 75-amp Receptacle group, auxiliary start Battery Disconnect Switch, Ground Level Starter, electric, 24-volt Diagnostic Connector Engine Shutdown Switch Lighting: – External, front, rear – Stop, single Batteries, low maintenance Alarm, reversing Starting and Charging System

• Tires, Rims, And Wheels

  Rims: – Tubeless, set of four Tires must be selected from the Mandatory Attachments section, choose between: – Tire, 17.5 × R25 VSMS L5S Bridgestone – Tire, 17.5 × R25, VSDL Bridgestone

• Operator Environment

  Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels) Horns, electric Instrumentation/gauges: – Speedometer/tachometer – Fuel level – Hydraulic oil temperature – Engine coolant temperature Light, warning, residual brake Pilot Hydraulic Implement Controls, Single Joystick Cab, ROPS and/or FOPS certified Steering and Transmission Integrated Control (STIC™) Steering Seat, Suspension Tee with retractable seat belt

• Power Train

  Engine: – Cat 3306B six cylinder, diesel – DITA (Direct Injection, Turbocharged, Aftercooled) Precleaner, engine air intake Fuel Priming Aid Brakes, full hydraulic enclosed wet multiple-disc (SAFR) Heat Shields Torque Converter Transmission Neutralizer Transmission, automatic planetary power shift (4F/4R)

• Other Standard Equipment

  Guards, engine and transmission Bucket Dump (3.1 m3/4.1 yd3) Catalytic Exhaust Purifier/Muffler Cap, Radiator Manual Release Decals, International Picto Graphics Service oil sample Fenders, Front, Rear Firewall Handholds Hydraulic Oil Cooler, Swing Out Valve, drain, transmission oil filter Protection bars, rear frame Radiator Grill, Swing Out

Optional Equipment

• Tires, Rims, And Wheels

  Rims: – Tube, set of four – Spare (Tube or Tubeless) – Rim Identification Numbering

• Optional Equipment

  After-Treatment Options – DPF (Flow Through) Brake Release Arrangements, Includes Steering Release – Recovery Hook – Recovery Bar Bucket: – Cutting Edge, Bolt-On – Cutting Edge, Cat Weld On – Heel Shrouds, Ejector and Dump Buckets – Lip Fully Welded or Tack Welded – Mechanically Attached Wear Plate System (MAWPS) – Various Sizes, Dump (2.5 m3/3.2 yd3, 2.8 m3/3.7 yd3, 3.4 m3/4.4 yd3), Ejector (2.4 m3/3.1 yd3) – Standard Lip or Bolt-On Lip – Wear Bars, Ejector and Dump Buckets – Wear Liner Covers: – Guard, for lift arm and front frame lights – Rear Grill (Additional Bolt-On Guard) Draw Bar Attachment, Bolt-On Fast Fill System: – Coolant – Engine Oil – Fuel – Hydraulic Oil – Transmission Oil Fluids – Arctic Fuel – Arctic Coolant Lifting Group, Mine Transfer Lubrication System – Automatic – Centralized Operators Station ROPS/FOPS Enclosed – Air Conditioning – Cab Pressurizer and Filter – Dome Light – Door Strut – Heater – Radio Ready Compartment for Radio and Speakers – Wiper Control, Intermittent Park Brake Automatic Activation Park Brake Switch Engagement – Push to Apply – Pull to Apply Reflective Tape Remote Control Interface (excludes Transmitter and Receiver), Includes Warning Lights (Green) – Cattron – RCT Reversible Steering Ride Control System Rim – Tube Type – Tube or Tubeless (chain ready) – Spare (Tube or Tubeless) – Rim Identification Numbering Secondary Steering System Service Tools – Recovery Bar (for use with Brake Release, Recovery Bar System) – Reference Parts Manual for Additional Tooling Available Switches – Idle Timer – Lift Arm Positioner – Transmission Neutralizer Override Switch – Transmission Pressure ABA Park Brake Engagement

• Operator Environment

  Operator's Station ROPS/FOPS Enclosed: – Air Conditioning – Cab Pressurizer and Filter – Dome Light – Door Strut – Heater – Radio Ready Compartment for Radio and Speakers – Wiper Control, Intermittent Instrumentation/gauges: – Brake pressures Secondary Steering System

• Power Train

  Engine: – After-Treatment Options – DPF (Flow Through) Reversible Steering Park Brake Automatic Activation Park Brake Switch Engagement – Push to Apply/Pull to Apply Radiator, High Efficiency