The Cat® 962 Wheel Loader is your go-to machine for getting more done with less hassle. It’s built tough to power through demanding jobs while keeping fuel use low and uptime high. Smart features help operators stay efficient, while enhanced safety features help to safeguard your crew. Whether you’re moving rock, timber, or material, the 962 is ready to roll—day after day, load after load.
| Engine Power - 2,100 rpm ISO 14396:2002 | 269hp |
| Engine Power - 2,100 rpm ISO 14396:2002 | 273 hp (metric) |
| Engine Model | Cat® C7.1 |
| Gross Power - 2,100 rpm SAE J1995:2014 | 273kW |
| Gross Power - 2,100 rpm SAE J1995:2014 | 277 hp (metric) |
| Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011 | 255 hp (metric) |
| Engine Torque - 1,400 rpm ISO 14396:2002 | 918lbf·ft |
| Gross Torque - 1,400 rpm SAE J1995:2014 | 926lbf·ft |
| Net Torque - 1,400 rpm ISO 9249:2007, SAE J1349:2011 | 867lbf·ft |
| Displacement | 427in³ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Biodiesel Capability | Up to B20¹ |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100% |
| Operating Weight | 44469lb |
| Note | Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear |
| Forward - 1 | 4.3mile/h |
| Forward - 2 | 7.5mile/h |
| Forward - 3 | 12mile/h |
| Forward - 4 | 16mile/h |
| Forward - 5 | 24.5mile/h |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 7.5mile/h |
| Reverse - 3 | 16mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Exterior Sound Power Level - ISO 6395:2008 | 107dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69dB(A) |
| Exterior Sound Power Level - ISO 6395:2008² | 104dB(A) |
| Note (1) | ¹Including countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 25869lb |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 27529lb |
| Breakout Force | 42489lbf |
| Note (1) | For a machine configuration as defined under “Weight.” |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Fuel Tank | 68.6gal (US) |
| DEF Tank | 4gal (US) |
| Cooling System | 14.3gal (US) |
| Crankcase | 5.5gal (US) |
| Transmission | 11.4gal (US) |
| Differential - Final Drives - Front | 11.4gal (US) |
| Differential - Final Drives - Rear | 11.4gal (US) |
| Hydraulic Tank | 25.6gal (US) |
| Implement System - Maximum Pump Output at 2,340 rpm | 85gpm |
| Implement System - Maximum Operating Pressure | 4250psi |
| Hydraulic Cycle Time - Total | 9.4s |
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 23.83ft |
| Hinge Pin Height at Carry Height | 2.17ft |
| Hinge Pin Height at Maximum Lift | 13.83ft |
| Lift Arm Clearance at Maximum Lift | 11.33ft |
| Rack Back - Maximum Lift | 55° |
| Rack Back - Carry Height | 51° |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 25.17ft |
| Hinge Pin Height at Carry Height | 2.5ft |
| Hinge Pin Height at Maximum Lift | 14.75ft |
| Lift Arm Clearance at Maximum Lift | 11.83ft |
| Rack Back - Maximum Lift | 56° |
| Rack Back - Carry Height | 48° |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Note |
|
| Operator Environment |
|
| Powertrain |
|
| Electrical |
|
| Hydraulics |
|
| Linkage |
|
| Monitoring System |
|
| Onboard Technologies |
|
| Safety |
|
| Note |
|
| Operator Environment |
|
| Powertrain |
|
| Electrical |
|
| Hydraulics |
|
| Linkage |
|
| Monitoring System |
|
| Onboard Technologies |
|
| Safety |
|
| Additional Equipment |
|
| Special Configurations |
|
Print
Email
your location
call us
contact us