18 Motor Grader

Standard Equipment

• Note	Standard and optional equipment may vary. Consult your Cat dealer for details.

• Operator Environment

  Adjustable electric arm rest Adjustable wrist rest Air conditioner with heater Air horn Articulation, automatic Return-to-Center Centershift pin indicator Coat hook Cup holder Display, digital speed and gear Doors, left and right side with wiper Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine RPM, and hydraulic oil temp) Gauges, machine level Information display touch screen Joystick gear selection Joystick hydraulic controls for implements, steering, transmission Ladders, cab, left and right side Lights, left and right side lights Lights, night time cab Meter, hour, digital Mirror, inside rearview, wide angle Power port, 12V Radio ready, entertainment ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed) Seat, cloth-covered, comfort air suspension Storage compartments Throttle control, electronic

• Power Train

  Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector Air-to-air after cooler (ATAAC) Auto Diff Lock Belt, serpentine, automatic tensioner Brake wear indication Brakes, oil disc, four-wheel, hydraulic Consistent power to ground Critically Low Fluid Level Monitoring System Differential, lock/unlock Drain, engine oil, high speed Electronic over speed protection Engine ECO Mode: Tier 4 Final/Stage V/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards Engine, compression brake Ether starting aid Fuel tank, fast fill, ground level Fuel-water separator Hydraulic Demand Fan Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) equivalent and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards OK-to-Start Optimized VHP Parking brake – multi disc, sealed, oil-cooled Priming pump, fuel Rear axle, modular Sediment drain, fuel tank Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) equivalent or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards. Transmission, 8F/6R, power shift VIMS no telematics

• Guards

  Front axle cylinder guard Transmission guard

• Electrical

  Alternator, 150 ampere, sealed Batteries, maintenance free, heavy duty, 1,400 CCA Breaker panel Electrical system, 24V Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front Product Link Starter, electric, heavy duty

• Safety

  Alarm, back up Ground level engine shutdown Hammer (emergency exit) Horn, electric Lockout, hydraulic implement for roading Operator not present monitoring system Paint, glare reducing – top of front frame, rear enclosure and ripper cylinders Rearview camera Seat belt indicator Seat belt, retractable 76 mm (3 in) Secondary steering Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (two) Windows, tempered: – Left and right side wipers – Rear with intermittent wiper Light, LED, warning strobe Lights front LED Lights, front headlights high Lights, front headlights low Mounting, for warning light Service lights Working lights Halogen Working lights LED

• Other Standard Equipment

  3-bolt blade bracket AccuGrade ARO Accumulators, blade lift Brake accumulators, dual certified Cat Grade Control Cross Slope CD ROM Parts Book Clutch, circle drive slip Cutting edges, flat DH-2 steel: – 254 mm × 35 mm (10 in × 1.4 in) – 19 mm (3⁄4 in) mounting bolts Doors (four), engine compartment, (two left, two right hand) locking Doors, two service, left and right side Drawbar – six shoe with replaceable wear strips End bits, 16 mm (5⁄8 in) DH-2 steel, 19 mm (3⁄4 in) mounting bolts Fast fill fuel 567.8 L/min (150 gpm) Fluid check Frame, articulated, with safety lock Hydraulics, load-sensing Metallic fuel tank, 496 L (131 gal) Metallic DCM wear strips Modular cooling package Moldboard: – 5.5 m × 787 mm × 25 mm (18 ft × 31 in × 1 in) – Hydraulic side shift and tip Radiator, two cleanout access doors Rear bumper Rear tandem access steps and hand bars S·O·S ports: engine, hydraulic, transmission, coolant Tandem walkway Top adjust circle wear strips Fire suppression ready Ripper, rear Push block, counterweight

• Work Tools/g.e.t.

  5.5 m (18 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 13⁄8 in)

• Tires, Rims, And Wheels

  A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

• Fluids

  Extended Life Coolant to –35° C (–31° F)

Optional Equipment

• Note	Standard and optional equipment may vary. Consult your Cat dealer for details.

• Operator Environment

  Comfort package Heated door Mirrors high visibility Mirrors, outside heated 24V Mirrors, outside mounted Seat heated Seat heated/ventilated Windows cleaning platform and ladders left-right hand side

• Power Train

  Transmission, autoshift

• Guards

  Debris guard Rear fenders Sound suppression, engine enclosure and transmission

• Safety

  Additional monitor for rearview camera Enhanced access platform Machine Security System Key Service access platform

• Other Attachments

  Auto-lube, Centro-matic Auto-lube, ripper enhancement Control, blade, variable float Heater, engine coolant, 120V Heater, engine coolant, 240V Hydraulic arrangements with additional hydraulic valves Base+1 Hydraulic arrangements with additional hydraulic valves Base+5 Product Link Elite dual Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare) Weather, Cold Plus package

• Work Tools/g.e.t.

  5.5 m (18 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in) Tooth, ripper

• Fluids

  Coolant, –51° C (–60° F)