C7.1 (Electronic Control System)

C7.1 (Electronic Control System)

Power Rating

Power Range 100 - 200 ekW

Generator Set Specifications

Frequency 50 / 60
Speed 1500 rpm / 1800 rpm

Engine Specifications

Emissions IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II
Configuration Inline 6, 4-Stroke Cycle Diesel
Displacement 428in³
Aspiration Turbocharged / Aftercooled
Governor Electronic (A5 ECM)
Bore 4.13in
Stroke 5.31in
Refill Capacity Lube Oil System w/oil filter change: 21 L / 5.6 gal
Oil Change Interval 500 hrs
Rotation from Flywheel End Counterclockwise
Cooling Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled

Generator Set Dimensions

Length 76.3 in /1,940 mm
Height 49.7 in / 1,263 mm
Engine Dry Weight 3355 lb / 1,522 kg

Generator Set Dimensions and Weights - Dependent on Generator Type

Width 38.0 in / 965 mm

Standard Equipment

  • Cooling System
    • Gear-driven jacket-water and auxiliary water pumps
    • Engine mounted air cleaner and expansion tank
    • Integral plate-type oil cooler
  • Exhaust System
    • Watercooled exhaust manifold and turbocharger
  • Fuel System
    • Common Rail fuel system
  • General
    • 3-phase AREP generators with 300% short circuit capability
    • Digital Automatic Voltage Regulator
  • Lube System
    • Open crankcase ventilation system
  • Moutnting System
    • Engine mounted fuel and oil filter
  • Mounting System
    • Engine mounted customer interface and control relays
  • Starting System
    • 12 V or 24 V starter motor

Optional Equipment

  • General
    • AC Voltage
    • Factory installed generator space heater kit
    • Glow plugs
    • MCS Certifications
    • Double wall high pressure fuel lines
    • Engine shutdown sensors and shutdown controller