C4.4 (Electronic Control System)

C4.4 (Electronic Control System)

Power Rating

Power Range 71 - 129 bkW

Generator Set Specifications

Frequency 50 / 60

Engine Specifications

Emissions U.S. EPA Tier 3, EU Stage V, China II
Rated Engine Speed 1500 / 1800 rpm
Bore 4.13in
Stroke 5in
Displacement 268in³
Aspiration Turbocharged - Aftercooled and turbo only aspiration (Turbocharged aspiration only for 65ekW (71bkW))
Governor Electronic (A5 ECM)
Configuration In-line 4, 4-stroke-cycle diesel
Refill Capacity Lube Oil System w/Oil filter change: 11 L 2.8 gal)
Oil Change Interval 500 hours
Cooling Heat exchanger, combined circuit keel cooling, or separate circuit keel cooling
Flywheel Housing SAE No. 03 with SAE 11.5 flywheel (126 teeth)
Rotation from Flywheel End Counterclockwise

Dimensions & Weights

Length 33.7in
Height 40.9in
Minimum Width 30.6in
Maximum Width 32in
Minimum Engine Dry Weight 1200lb
Maximum Engine Dry Weight 1278lb

Standard Equipment

  • Cooling System
    • Gear-driven jacket-water and auxiliary water pumps
    • Engine mounted air cleaner and expansion tank
    • Integral plate-type oil cooler
  • Exhaust System
    • Watercooled exhaust manifold and turbocharger
  • Fuel System
    • Common Rail fuel system
    • Electric fuel priming pump
  • General
    • Internal engine balancing shaft
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Open crankcase ventilation system
  • Mounting System
    • Engine mounted fuel and oil filter
    • Engine mounted customer interface and control relays
  • Starting System
    • 12V or 24V starter motor

Optional Equipment

  • General
    • MGGP 200 Gauge Panel and interface harness
    • Engine shutdown sensors and shutdown controller
    • Double wall high pressure fuel lines
    • EMCP engine control panel
    • Exhaust elbow and bellows
    • Rear mounting feet
    • Glow plugs
    • Jacket water heater
    • Jacket water connections (keel cooled)
    • SOSSM sample points
    • Glow plugs