| Net Power | 21hp |
| Engine Model | C1.1 |
| Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21hp |
| Gross Power - SAE J1995:2014 | 21.6hp |
| Bore | 3in |
| Stroke | 3.2in |
| Displacement | 69in³ |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. |
| Note (1) | Engine power is tested per ISO 14396:2002. |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
| Operating Weight | 4473lb |
| Minimum Operating Weight with Canopy* | 3803lb |
| Maximum Operating Weight with Canopy** | 4211lb |
| Minimum Operating Weight with Cab* | 4075lb |
| Maximum Operating Weight with Cab** | 4473lb |
| EU: CE Plate Weight with Canopy*** | 4145lb |
| EU: CE Plate Weight with Cab*** | 4409lb |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. |
| Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |
| Dig Depth | 101.2in |
| Vertical Wall | 76.4in |
| Maximum Reach - Ground Level | 155.9in |
| Maximum Reach | 158.7in |
| Maximum Dig Height | 142.5in |
| Maximum Dump Clearance | 103.9in |
| Boom In Reach | 55.9in |
| Tail Swing | 39.2in |
| Maximum Blade Height | 10.6in |
| Maximum Blade Depth | 10.4in |
| Boom Height - Shipping Position | 40.2in |
| O/A Shipping Height | 90.6in |
| Swing Bearing - Height | 17.4in |
| O/A Undercarriage Length | 62.6in |
| Overall Shipping Length* | 146.1in |
| Boom Swing - Right | 50° |
| Boom Swing - Left | 65° |
| Track Belt/Shoe Width | 9.1in |
| Track Width - Retracted | 39in |
| Track Width - Expanded | 51.18in |
| Minimum Ground Clearance Below Undercarriage | 5.9in |
| Stick Length | 45.7in |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Travel Speed - High | 2.7mile/h |
| Travel Speed - Low | 1.8mile/h |
| Maximum Traction Force - High Speed | 2675.2lbf |
| Maximum Traction Force - Low Speed | 4136.5lbf |
| Ground Pressure - Minimum Weight | 3.9psi |
| Ground Pressure - Maximum Weight | 4.3psi |
| Gradeability - Maximum | 30 degrees |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Top Guard | ISO 10262:1998 (Level I) |
| Cooling System | 1gal (US) |
| Engine Oil | 1.2gal (US) |
| Fuel Tank | 6.9gal (US) |
| Hydraulic Tank | 4.8gal (US) |
| Hydraulic System | 6.9gal (US) |
| Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 99dB(A) |
| Note | European Union Directive “2000/14/EC” |
| Width* | 39in |
| Height | 8.9in |
| Note | *Expanded – 1300 mm (51 in) |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Pump Flow at 2,400 rpm | 17.4gpm |
| Operating Pressure - Equipment | 3553.4psi |
| Operating Pressure - Travel | 3553.4psi |
| Operating Pressure - Swing | 2132.1psi |
| Auxiliary Circuit - Primary - Flow | 8.7gpm |
| Auxiliary Circuit - Primary - Pressure | 3553.4psi |
| Auxiliary Circuit - Secondary - Flow | 3.7gpm |
| Auxiliary Circuit - Secondary - Pressure | 3553.4psi |
| Digging Force - Stick - Standard | 2540.3lbf |
| Digging Force - Stick - Long | 2203.1lbf |
| Digging Force - Bucket | 4406.3lbf |
| Machine Swing Speed | 9.8r/min |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1 |
| Dig Depth | 93.3in |
| Vertical Wall | 72.8in |
| Maximum Reach - Ground Level | 149.6in |
| Maximum Reach | 152.4in |
| Maximum Dig Height | 139.8in |
| Maximum Dump Clearance | 100.8in |
| Boom In Reach | 55.9in |
| Tail Swing | 39.2in |
| Maximum Blade Height | 10.6in |
| Maximum Blade Depth | 10.4in |
| Boom Height - Shipping Position | 42.1in |
| O/A Shipping Height | 90.6in |
| Swing Bearing - Height | 17.4in |
| O/A Undercarriage Length | 62.6in |
| Overall Shipping Length* | 146.5in |
| Boom Swing - Right | 50° |
| Boom Swing - Left | 65° |
| Track Belt/Shoe Width | 9.1in |
| Track Width - Retracted | 39in |
| Track Width - Expanded | 51.18in |
| Minimum Ground Clearance Below Undercarriage | 5.9in |
| Stick Length | 37.8in |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Long Stick | 18lb |
| Steel Tracks | 110lb |
| Expandable Undercarriage | 271lb |
| Recyclability | 95% |
| Engine |
|
| Hydraulics |
|
| Operator Environment |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Guarding |
|
| Operator Environment |
|
| Undercarriage |
|
| Boom, Stick And Linkages |
|
| Electrical |
|
| Guarding |
|
| Other |
|
Print
Email
your location
call us
contact us