Your nearest location
finding your nearest location...
865-546-1414
contact us
Home New Compactors CP11 GC Vibratory Soil Compactor

CP11 GC Vibratory Soil Compactor

CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor CP11 GC Vibratory Soil Compactor

The Cat® CP11 GC Vibratory Soil Compactors bring a balance of easy operation, low operating costs and performance-boosting technology to the jobsite. Using a proven vibratory system designed for high reliability, the CP11 GC padfoot roller is ideally suited for cohesive and semi-cohesive soil applications.

Buy Used

Key Specs

  • Operating Weight - With Cab 25109 lb
  • Compaction Width 84 in
  • Gross Power 122.9 hp
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor
  • CP11 GC Vibratory Soil Compactor

Benefits

Simple to Operate

The CP11 GC features an easy-to-use operator interface and excellent visibility to the ground and drum edges. An auto-vibe function helps operators maintain consistency.

Low Operating Costs

Eco-Mode, extended service intervals and a hitch with sealed-for-life bearings that do not require routine maintenance help keep your operating and maintenance costs low.

Excellent Compaction Performance

Compaction technology along with machine features and drum options help you achieve target density in a wide variety of applications.

Weights

Operating Weight - With Cab 25109lb
Operating Weight - With ROPS/FOPS Canopy 24769lb
Weight - Drum with Cab 14084lb
Weight - Drum with ROPS/FOPS Canopy 13988lb
Note (1) Operating weights are approximate and consider full fluids and 75 kg (165 lb) operator. Cab weights include heat and air conditioning.

Dimensions

Compaction Width 84in
Overall Length 18.7ft
Overall Width 7.5ft
Maximum Height 9.8ft
Drum Diameter - Over Pads 60.9in
Wheel Base 9.8ft

Engine

Gross Power 122.9hp
Engine Power - ISO 14396 121hp
Net Power - ISO 9249 112.2hp
Net Power - SAE J1349:2011 111.2hp
Note (1) Net power advertised is the power available at the engine flywheel when equipped with a fan at maximum speed, air cleaner, clean emissions module, and alternator.
Engine Model Cat® C3.6
Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
Stroke 4.7in
Bore 3.9in

Operating Specifications

Ground Clearance 20.3in
Curb Clearance 19.5in
Turning Radius - Inside Drum Edge 12.7ft
Travel Speed - Maximum 6.8mile/h

Service Refill Capacities

Fuel Tank Capacity 56.3gal (US)
DEF Tank 5gal (US)
Cooling System 4.9gal (US)
Engine Oil - With Filter 3.1gal (US)
Eccentric Weight Housings (combined) 6.9gal (US)
Axle and Final Drives 2.6gal (US)
Hydraulic Tank 6.1gal (US)

Sustainability

Recyclability 97%

Vibratory System

Nominal Amplitude - High 0.071in
Nominal Amplitude - Low 0.035in
Centrifugal Force - Maximum 55932lb
Centrifugal Force - Minimum 33249lb

Reliable Power

  • The propel system is driven by a single pump design and is ideal for flat to moderate grades.
  • Powered by a Cat® C3.6 engine that meets U.S. EPA Tier 4 Final, EU Stage V and Korea Stage V emission standards.
  • Eco-mode limits engine RPM helping to reduce fuel consumption.
  • Engine Idle Shutdown Timer reduces fuel burn and unnecessary idle time by shutting down the machine after a pre-set idling period.

Comfortable and Ergonomic Operator Station

  • The ISO-mounted operator station and rubber floormats help reduce noise and vibration for comfort during operation.
  • Easy to use controls are grouped by function and a large display informs operators of machine performance.
  • The seat, armrest and steering column are adjustable for all-day comfort.
  • Operators are protected from the elements by a standard equipped ROPS/FOPS canopy or an optional climate-controlled ROPS/FOPS cab with hinged glass windows.
  • Cab configurations can be upgraded to a deluxe high back air-ride seat to enhance operator comfort. 

Safety Features

  • Angled steps, handrails, and an antiskid surface help provide stability during entry and exit of the operator station. 
  • Internal and external mirrors are available to provide the operator with a broad view of the jobsite.
  • Enhance visibility with an optional rear vision camera with large color touchscreen display for more complete operator control and safety.
  • Optional operator presence seat sensor and seat belt switch.

Excellent Compaction Performance

  • The exclusive pod-style eccentric weight vibratory system is designed to provide high reliability, smooth performance and low noise levels with a 3-year, 3000-hour maintenance interval.
  • High static linear loads and amplitudes.
  • The optional Traction Control system helps improve traction in soft underfoot conditions such as sand or loose material. 
  • The Auto-vibe function helps operators easily maintain consistent, high-quality compaction.
  • The drum features unique, tapered, oval-faced pads engineered to penetrate deeper and deliver higher weight concentration to maximize compactive effort. Also available in a square pad design.

Enhance Quality and Productivity with Technology

  • Optional Cat Compact technologies help you consistently meet compaction targets faster, more uniformly, and in fewer passes – saving on fuel and reducing rework and material costs. 
  • Exclusive Machine Drive Power (MDP) is an energy-based measurement and can be used on all soil types in either static or vibratory mode.

Virtually Maintenance Free

  • The articulated hitch with sealed-for-life bearings does not require routine maintenance.
  • Ground-level access to all maintenance points for easy service and fluid sampling.
  • Monitor fluid conditions with regular sampling to help extend change intervals up to 500 hours engine oil, 3000 hours eccentric housing and hydraulic oil, and 12000 hours coolant.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • VisionLink® takes the guesswork out of managing your entire fleet–regardless of size or equipment manufacturer*–by providing maintenance needs, machine hours, location, fuel usage, idle time, diagnostic codes, and more through interactive dashboards on your mobile device or desktop, helping you make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite. 
  • Remote Flash allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency**
  • Remote Troubleshoot allows your Cat dealer to perform diagnostic testing on your connected machine remotely**

Sustainability

  • The Cat C3.6 is available in configurations that meet U.S. EPA Tier 4 Final, EU Stage V and Korea Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester) or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
        *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
  • Auto engine idle shutdown helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • A well-trained operator is worth the investment. Skilled operators benefit your bottom line by maximizing productivity, avoiding costly downtime, and maintaining jobsite safety - which can help to improve fuel efficiency and reduce greenhouse gas emissions.
  • Extended maintenance intervals not only reduce downtime but can decrease the amount of fluid and filters that are replaced over the life of the machine. Extend change intervals up to 500 hours engine oil, 3000 hours eccentric housing and hydraulic oil, and 12000 hours coolant.
  • Performance and safety can be augmented with standard and optional cameras that are viewed on in-cab displays.
  • Cat Compact technologies help you consistently meet compaction targets faster, more uniformly, and in fewer passes - saving on fuel and reducing rework and material costs.
  • Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other "unseen" issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • ROPS/FOPS Canopy with Handrails, Floor Mat, Interior Rear View Mirror
    • Vinyl Suspension Seat
    • Adjustable Tilting Steering Column
    • High Visibility 76 mm (3 in) Seat Belt
    • 12-Volt Power Outlet
    • Horn, Backup Alarm
  • Vibratory System
    • Padfoot Drum - Oval or Square Pads
    • Pod-Style Eccentric Weight Housings
    • Dual Amplitude, Dual Frequency
    • Auto-vibe Function
    • Dual Adjustable Steel Scrapers
  • Technology Solutions
    • VisionLink®
    • Remote Flash
    • Remote Troubleshoot
    • Remote Disable
  • Powertrain
    • Cat® C3.6 Engine
    • Single Propel Pump
    • Fuel Filter, Water Separator, Priming Pump, Water Indicator
    • Eco-Mode
    • Radiator/Hydraulic Oil Cooler
    • Dual Braking System
    • Two-Speed Hydrostatic Transmission
    • Limited Slip Differential
  • Electrical
    • 12-Volt Electrical System
    • 150-Amp Alternator
    • 900 Cold-cranking Amps Battery Capacity
    • Battery Disconnect Switch
  • Other
    • Scheduled Oil Sampling S·O·S℠ Ports: Engine Oil, Hydraulic Oil, and Coolant
    • Sight Gauges for Hydraulic Oil Level and Radiator Coolant Level
    • Lug Tread Tires
    • Working Lights (2 Forward, 2 Rear)

Optional Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • ROPS/FOPS Cab with Climate Control, Floor Mat, Exterior Rear View Mirrors
    • Deluxe High-back Air-ride Seat (Cab)
    • Sun/Debris Shields (Canopy)
    • Roll-down Sun Screen (Cab)
    • Interior Rear View Mirror (Cab)
    • Exterior Rear View Mirrors (Canopy)
    • Rear View Camera with Color Touchscreen Display
    • Seat Belt Switch
    • Sound Reduction Kit
  • Technology Solutions
    • Measure - Machine Drive Power (MDP)
    • Machine Speed Sensor
  • Powertrain
    • Traction Control Basic
    • Transmission Guard
  • Other
    • High Ambient Hydraulic Oil (Factory Fill)
    • Upgraded Lighting Package (4 Forward, 4 Rear)
    • Amber Rotating Beacon

Similar Products

CS10 GC Vibratory Soil Compactor
CS10 GC Vibratory Soil Compactor
  • Operating Weight - With Cab
    23136 lb
  • Compaction Width
    84 in
  • Gross Power
    122.9 hp
  • Engine Power - ISO 14396
    121 hp
View Details
CS11 GC Vibratory Soil Compactor
CS11 GC Vibratory Soil Compactor
  • Operating Weight - With Cab
    24775 lb
  • Compaction Width
    84 in
  • Gross Power
    122.9 hp
  • Engine Power - ISO 14396
    120.7 hp
View Details
CS12 Vibratory Soil Compactor
CS12 Vibratory Soil Compactor
  • Operating Weight - With Cab
    25353 lb
  • Compaction Width
    84 in
  • Gross Power
    159 hp
  • Engine Power - ISO 14396
    156.9 hp
View Details