926M AGGREGATE HANDLER

The Cat 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.


SPECIFICATIONS
Engine
Engine Model Cat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396 153 HP
Maximum Rated Gross Power - ISO 14396 (DIN) 155 HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 155 HP
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 153 HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
Rated Net Power 148 HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 149 HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 148 HP


Buckets
Bucket Capacities 2.5 m3 (3.3 yd3)


Weights
Operating Weight 28933 lb


Engine
Maximum Gross Power 153 HP
Bore 4 in
Stroke 5 in
Displacement 427 in³


Cab
ROPS ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.


Engine
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 531 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 531 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4) 517 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 517 ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 511 ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 511 ft·lbf
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 148 HP
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 146 HP
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Note (1) * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 142 HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 144 HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 141 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 151 HP


Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds
Lift Cylinder, Double Acting - Bore Diameter 4.3 in
Lift Cylinder, Double Acting - Rod Diameter 2.4 in
Lift Cylinder, Double Acting - Stroke 28.7 in
Maximum Flow - Implement Pump 40 gal/min
Maximum Flow - Implement Pump - 3rd Function* 40 gal/min
Maximum Working Pressure - Implement Pump 3771 psi
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note (3) * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder 4061 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3771 psi
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 4061 psi
Tilt Cylinder, Double Acting - Bore Diameter 5.1 in
Tilt Cylinder, Double Acting - Rod Diameter 2.8 in
Tilt Cylinder, Double Acting - Stroke 21.9 in


Operating Specifications
Full Turn Tip Load 17580 lb


Power Train
Brakes - Parking Spring applied hydraulically released
Brakes - Service Inboard wet disc
Front Axle Fixed
Front Axle - Traction Aid** Locking differential (standard)
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2) Offset rims available to meet European roading requirements.
Note (3) **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Rear Axle Oscillating
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 ± 13.5 degrees
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Rear Axle - Traction Aid - Optional Limited slip differential


Service Refill Capacities
Cooling System 7.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Engine Crankcase 5.3 gal (US)
Front Axles 5.5 gal (US)
Fuel Tank 51.5 gal (US)
Hydraulic System - Including Tank 42.3 gal (US)
Hydraulic Tank 23.8 gal (US)
Rear Axles 5.5 gal (US)
Transmission - Gear Box 2.2 gal (US)


Steering
Maximum Flow - Steering Pump 34 gal/min
Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
Maximum Working Pressure - Steering Pump 3500 psi
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
Steering Cylinder, Double Acting - Bore Diameter 2.8 in
Steering Cylinder, Double Acting - Rod Diameter 1.6 in
Steering Cylinder, Double Acting - Stroke 17.2 in


Transmission
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8 mile/h
Forward and Reverse - Range 3 17 mile/h
Forward and Reverse - Range 4 25 mile/h
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).


BENEFITS & FEATURES
Application Specific Configuration


Increased Payload
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

Long Life Sand and Gravel Buckets
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

Protect your Power Train
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Customize Your Experience


Work as one with your machine by customizing the controls.

Flexible Power Train
A smooth, stepless electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.
  • Select your Power Train Mode: – Torque Converter (TC) for smooth rollout. – Hystat for aggressive engine braking. – Default mode which blends the best of Hystat and Torque Converter characteristics.
  • Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions.
  • Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.

Adjustable Electro Hydraulic Controls
Easily customize the hydraulic performance through secondary display to optimize your efficiency.
  • Optimize hydraulic modulation with Fine Mode control when working with forks.
  • Quicker hydraulic response for fine grading at speed and quick functions through Lift and Tilt response settings.
  • Fully adjustable ride control activation speed along with 3rd function auxiliary flow for powering a broom.

Operator Profiles and Coded Start
  • The M Series Wheel Loaders remember your personal settings with unique operator codes to make this machine truly yours and keep it secure on the job site.

Efficiently Powerful


Intelligent Power Management
The Caterpillar exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency.

Power on Demand
A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with increased hydraulic speed to get your job done faster.

Standard Power Mode
  • Saves up to 10% fuel while running at an efficient 1,600 rpm.
  • Recommended for load and carry to maximize fuel efficiency.
  • Power-by-range logic increases power in speed Range 4 automatically to maximize travel speed and grade climbing performance.
  • Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.

Performance Power Mode
  • Enabled at the push of a button (HP+)
  • Boosts engine power by up to 10% in all speed ranges.
  • Boosts engine speed by over 12%.
  • Increases hydraulic cycle times and productivity.

Six Cylinders of Efficient Power
The Cat C7.1 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. The engine meets Tier 4 Final and Stage IV emission standards with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.
  • No downtime for regeneration with a passive low temperature system that keeps you on the job.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) with up to four fuel tank fills per DEF fill.
  • Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
  • Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Power to the Ground
Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.

Work Made Easy


Optimized Z-bar Linkage
The Caterpillar patented and optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.
  • Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation II lift arm design.

Quick Loading, Performance Series Buckets
Performance Series Sand and Gravel Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. Wear plates on the sides and bottom maximize bucket life in abrasive aggregate rehandling applications.

Smooth and Predictable Multi-Function Performance
M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.
  • Multi-Function without compromise through Caterpillar's exclusive dedicated hydraulic systems featuring three pumps. – 1st pump for Intelligent Hydrostatic drive – 2nd pump for implements – 3rd pump for steering system
Drive, lift and steer simultaneously with smooth, predictable control. The M Series simply does what you ask it to.
  • Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programmed set points maximizing cutting edge life.
  • Fine tune hydro-mechanical performance with fully adjustable 3rd function flow through the secondary display (when equipped) for a perfect marriage between machine and attachments.

Enjoy All Day Comfort


Have a Seat and Experience:
  • Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
  • Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II linkage and clean hydraulic lines routing.
  • Automatic climate control with heated rear glass and external mirrors for a quick defrost.
  • Fully adjustable controls including steering column, joystick and seat suspension.
  • Information at a glance with large primary LCD display and full color secondary display.
  • An extra eye on the job site with rear view camera and optional integrated rear object detection.
  • A heated and cooled seat option for added comfort in a wide range of climates.

An easy day at work with:
  • A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional Bluetooth radio with integrated microphone plus an auxiliary port.
  • Easy access to vital machine parameters with the optional secondary display, working in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
  • Comfortable soft stops at cylinder end stroke conditions and programmable kickout points with Caterpillar's exclusive electro-hydraulic cylinder snubbing.
  • An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
  • Early starts and late finishes are made easier with optional LED lighting package that includes engine compartment lighting to illuminate the way for checking oil, and coolant level along with refueling the machine in dark conditions.

Configured for Success


The Way You Want It
A complete range of optional equipment and work tools give you the versatility to configure an Aggregate Handler to be successful in your business. Get with your Cat dealer to configure yours.

Guards:
  • Lights
  • Drive shaft
  • Side power train
  • Lower power train
  • Crank case

Debris Packages:
  • Elevated breathers: axles and gear box
  • Reversing fan
  • Sealed alternator
  • Turbine precleaner

Operator Environment:
  • Seat, deluxe or premium
  • Quick steer
  • Deluxe cab (with display)

Work Tools
  • Full range of tools

Other Options:
  • Autolube
  • Coupler: Fusion™ and ISO
  • Auxiliary hydraulics: 3rd and 4th
  • Windshield washing platform
  • Ride Control
  • Fenders: extended and full coverage
  • Aggregate weight set
  • Cold start package
  • Rear object detection
  • Blue Angel certification
  • Beacon
  • LED auxiliary lights

Service


Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:
  • Product Link™ PRO standard with three year subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fins per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support


Renowned Cat Dealer Support
Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

EQUIPMENT
Standard Equipment

POWER TRAIN
  • Axle seal guards
  • Auto idle shut down feature
  • Cat C7.1 ACERT engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Filtered crankcase breather – Diesel particulate filter (Fit for Life)
  • Coolant protection to –34° C (–29° F)
  • Differential lock in front axle
  • Dry type air cleaner
  • Enclosed wet disc full hydraulic brakes
  • Fuel priming pump, automatic
  • Fuel water separator
  • Hydraulically driven demand cooling fan
  • Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
  • Lubed for life driveshafts
  • Parking brake, electric
  • Wide spaced 6 fins per inch cooling package
  • S·O·SSM sampling ports
  • Throttle lock and maximum speed limiter
HYDRAULICS
  • Automatic lift, lower and tilt kickouts
  • Bucket and Fork Modes, adjustable in-cab
  • Cylinder damping at kickout and end stops
  • Fine Mode control in Fork Mode
  • Hydraulic Response setting
  • Load sensing hydraulics and steering
  • Seat-mounted hydraulic joystick controls
ELECTRICAL
  • Alternator, 115-amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24 volt system
  • Back-up alarm
  • Emergency shutdown switch
  • Heavy duty gear reduction starter
  • Product Link PRO with subscription
  • Remote jump start post
  • Resettable main and critical function breakers
OPERATOR ENVIRONMENT
  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • Cab, enclosed and pressurized
  • Cup holders
  • External heated mirrors with lower parabolic
  • Ground level cab door release
  • Gauges: – Digital hour meter, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
  • Hydraulic control lockout
  • Interior cab lighting, door and dome
  • Interior rearview mirrors (2)
  • Lunch box storage
  • Operator warning system indicators
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat-mounted controls, adjustable
  • Sliding glass on the side windows
  • Column mounted multi function control – lights, wipers, turn signal
  • Suspension seat, fabric
  • Tilt and telescopic steering wheel
  • Wet arm wiper/washer, front and rear
OTHER STANDARD EQUIPMENT
  • Large-access enclosure doors
  • Parallel lift loader linkage
  • Recovery hitch with pin
  • Remote mounted lubrication points
  • Lockable compartments and enclosures

Optional Equipment

Cab, deluxe (standard in Europe):
  • Automatic blower control
  • Electrically adjustable heated mirrors (2)
  • LED interior lighting
  • Secondary display to adjust settings
Cold start package:
  • Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
Guards
  • Power train, (lower, side, driveshaft and crankcase)
  • Windshield and lights
  • Cylinders, tilt and steering
Radio packages:
  • Radio ready with Bluetooth
  • Radio, AM/FM with Bluetooth and clock
  • Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
Seats:
  • Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
  • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
Steering:
  • Dual mode and Secondary
Tires:
  • Bias ply, 17.5, 20.5-25
  • Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25